Name: Petrol station Magnetostrictive float type gasoline diesel kerosene light heavy oil alcohol liquid Level transmitter
Brand: GUIHE
Availability: InStock

Product Details

Product Description

Petrol station Magnetostrictive float type gasoline diesel kerosene light heavy oil alcohol liquid Level transmitter

SYW-A Magnetostrictive Probe

The probe consist of:

Fully enclosed magnetostrictive probe.

Electronic Pod using for data measuring and transforming.

Floater made according to the product.

Features:

Safety: ExiaIIBT4 (Intrinsically safe) issued by PCEC

Accuracy: level accuracy is ±0.5mm

Stability: strong anti-jamming ability

Efficiency: less than 1 second to test one tank.

Probe Performance

Item	SYW-A
Purpose	To measure product level, water level and temperature
Titles of medium	Gasoline, diesel, kerosene, ethanol , water etc.
State of medium	Liquid
Explosion-proof grade	ExiaIIBT4 (Intrinsically safe)
Pressure range	-0.02Mpa~0.6Mpa
Certificate	PCEC Conformity Certificate of Explosion-proof / Permit of Manufacture Measuring Instruments
Temperature	-40℃~70℃
Product Level Accuracy	±0.3mm
Water Level Accuracy	±0.3mm
Temperature Accuracy	±0.2℃
Height Resolution	0.023mm
Repeatability	±0.1mm
Temperature Effect	Error<0.2mm
Vibration Effect	Error<0.5mm
Lowest Product Inactive Zone	2.5'' floater-180mm
Lowest Water Inactive Zone	2.5'' floater-25mm
Measured Variable	Product level, interface level and temperature of 5 sensors and average temperature
Probe Length	600~4000mm
Method of Communication	RS-485
Probe Material	1Cr18Ni9Ti
Power Supply	+24~26VDC
Protection Class of Probe Canister	IP67
Max Communication Distance	1200m

Main functions :

Authority Management: It’s only need a password to setup the Magnetostrictive Probe parameter, others free operation.

Parameter Setting: Customers can setup parameters about tank, time and tank volume table.

Auto-monitoring: Monitoring up 1~8 (max 12) tanks, display all the tank information of real time.

Automatic Gauge: Display fuel level, water level, temperature, inventory and ullage, monitor the fuel delivery condition of real time. Display dynamically the change of fuel and water level with graphic and scale.

Inventory Report: Users can inquire and print the inventory at any moment.

Manual Delivery: Set up fuel delivery parameter, an automatic generating delivery report would be printed after delivery.

Tank Volume Table Edition: Users can input the tank volume table from computer, or input it word by word through touch screen. Tank with the same volume can be copied in the system, need not input one by one.

Static Leak Detection:During the idle time of the gas station, operator can do the leak detection ( 0.38 L/h ) for the tank ,also can print the delivery report.

Alarm: High fuel level alarm, low fuel level alarm, high water level alarm, fuel temperature upper limit alarm, fuel temperature lower limit alarm. With audible and visual alarm signal, audible alarm can be removed. It can connect with an outside explosion-proof ringer to avoid the fuel spilled.

Parameter Inquiry: Users can inquire the tank parameter, time parameter, and tank volume parameter.

Shift Exchange: Click the “Shift” button to accomplish shift exchange.

Print: All the report can be printed with an internal printer.

Communication Interface: Reserve two RS-232 port; achieve fuel buy, sale and stock data upload.

Intelligent control of oil pump: Control oil pump though use of relay avoiding that the oil spilled or pumpdown.

It enjoys tank volume table calibration function.

Preparation Before Installation

The following preparation should be down before the liquid level meter installation.

1. Vertical-pipe

2. Blind plate

3. Wiring RVVP4*0.75 shied cable from tank farm to control room, galvanized pipe on the outside of the shied cable. The cable from tank farm to control room can not have a connector.

4. The part of the galvanized pipe exposed from the wall of manhole length about 100mm, its outer thread (G3/4) length of 25mm, using for connection with explosion-proof box.

Packaging & Shipping

Our Services

1. Provide necessary conditions for the customers visiting factory.
2. Good quality with competitive price.
3. All products have been strictly Quality Checked before shipping.
4. Free repair within 12 months.
5. Great after-sale service and offer solution within 24 hours.
6.OEM is ok.

FAQ

1:How long will you give me the reply?

we will contact you in 2 hours as soon as we can.
2:Could I get samples?
Yes,we have materials in stock to help you to get the samples as soon as we can.
3:How about the quality of the magnets?
We have the certification of ISO, we could send the certification test of our company to you.
4:How is the price?
As we believe the quality is the most important,we will provide the best quality and lowest factory price.
5:Could you provide me the shortest lead time?
We have materials in our stock,if you really need,you can tell us and we will try our best to satisfy you.
6:Could I visit your factory?
Of course,if you need we will help you to visit our factory.
7:If I have paid,when will you help me to produce?
When we have received the money in our account,we will give you the receipt and arrange to produce immediately.