Specifications

1.passed ISO
2.erosion-resistance to glass metal
3.low pollution
4.Strong glass corrosion resistance

 

Brief introduction:

 

Our company can produce serious specification fused cast 33#,36#,41#AZS block for glass furnace ,and its output is over 5000tons per year. AZS series blocks are made from high qulity raw materials and machined through refined grind processes. So qualities of these refractory products can be guaranteed.

 

Application:

 

AZS 33 PT are mainly used for working ends, feeder channel, superstructures and top crowns.

AZS 33 ZWS(RR) are mainly applied for sidewalls;

AZS 33 WS (RT) are mainly used for sidewalls, tank bottom, superstructure, C-shaped brick and doghouse crown

 

we also produce other models of AZS, their properties are detailed in the table below:

 

Physical and chemical index:

Item		Behaviors
		AZS-33# ER 1681	AZS-36# ER 1685	AZS-41# ER 1711
Chemical Composition	Al2O3	≥50.00	≥49.00	≥45.00
	ZrO2	≥32.50	≥35.50	≥40.50
	SiO2	≤15.50	≤13.50	≤13.00
	Na2O+K2O	≤1.30	≤1.35	≤1.30
Bulk density g/cm3		≥3.75	≥3.85	≥4.00
Apparent Porosity %		≤1.2	≤1.0	≤1.2
Cold Crushing Strength  Mpa		≥300	≥300	≥300
Exudation Temperature of Glass Phase		≥1400	≥1400	≥1410
Bubble Separation Ratio(1300°C×10h)		≤1.2	≤1.0	≤1.0
Anti-corrosion rate of glass liquid 1500°C×36h (mm/24h)%		≤1.4	≤1.3	≤1.2
Apparent density (g/cm3)	PT(RN RC N)	≥3.50	≥3.50	≥3.70
	ZWS(RR EVF EC ENC)	≥3.65	≥3.70	≥3.90
	WS( RT VF EPIC FVP DCL)	≥3.75	≥3.8	≥4.00