Sidewall Used Fused Chrome Corundum Blocks
USD $1,500 - $1,700 /Ton
Min.Order:1 Ton
Zhengzhou Sunrise Refractory Co., Ltd.
Sidewall Used Fused Chrome Corundum Blocks
Zhengzhou Sunrise Fused Chrome Corundum Blocks Refractory Products for Glass are widely
used in stacks and uptakes of glass fiber furnace;severe corrosion areas for colored glass
furnaces; sidewalls, tank bottom and fore hearths of thermal insulation fiber glass furnace;
discharge hole of ceramic frit glass kiln, metallurgic molten bath and rotary kiln;zinc oxide melting
furnace, garbage destructors.
Application:
TY-G92-Crcan also be used as superstructures and burner blocks for insulating fiber glass furnaces.
which has higher corrosion resistance than AZS blocks when used in sidewall. It can be installed without preheat.
Physical and chemical index :
Item | Behaviors | ||
TY-G92-Cr | TY-G98 | ||
Chemical Composition % | Al2O3 | ≥92 | ≥98.5 |
SiO2 | ≤1.0 | ≤0.2 | |
Fe2O3 | ≤0.3 | ≤0.1 | |
CaO | ≤1.2 | ≤1.2 | |
Na2O | - | - | |
ZrO2 | ≥3 | - | |
Cr2O3 | ≥3 | - | |
Apparent Porosity (%) | ≤15 | ≤17 | |
Bulk Density g/cm3 | ≥3.25 | ≥3.2 | |
Cold Crushing Strength Mpa | ≥180 | 100 | |
Modulus of Rupture at High | ≥9.5 | ≥9.5 | |
Refractoriness °C | ≥1900 | ≥1850 | |
0.2Mpa Refractoriness Under Load T0.6 °C | ≥1680 | ≥1680 | |
Reheat liner change 1600°C×3h % | ≤±0.2 | ≤±0.2 |
Production Equipment:
Testing Equipment:
Abundent experience:
Sunrise Refractory can offer the customer excellent service relating to the production line of the float glass, which includes the design and advisory of the furnace and the tin bath, the matching of the materials and its construction. The products made by our company have been use in more than 80 production lines of float glass and production line of glass products both at home and abroad.
1. What's the color of your products?
Reply: Different bricks are featuring with different colors, for example, the fireclay bricks are generally yellow, fused cast AZS are mostly white. You may send the specification and requirements to us, our technician and factory will provide you with pictures and specific solutions.
2. Would you please send us some samples?
Reply: Our company can provide 100*100*50 samples for free. However, the frieght should be born by the clients. In particular case, if the mould is required to be made first for some special shaped blocks, the mould cost and sample fees assumed by clients will be highly appreciated.