IP test setup as per IEC 60529 clause no. 14.2.4a
Appliation:
IP test setup as per IEC 60529 clause no. 14.2.4a / laboratory equipment is for checking the protection against water with spray nozzle of 0,4 mm bore are used to prove the degrees of protection for the second characteristic numerals 3 and 4 “Protection against Spraying Water” resp. “Protection against splashing Water”.
The protection against spraying water / laboratory equipment is determined by causing the oscillating tube to oscillate over the specimen through an angle of 60°on either side of the vertical each at a speed of about 60°per second, while the jets coming from a larger angle than 60°to the vertical are baffled by deflectors. But there is also a slightly amended regulation, according to which the oscillating tube with deflectors stands still in a vertical position, and the specimen is turned-for example on a turntable-at a convenient speed a vertical axis.
Tester Purpose:
IP test setup as per IEC 60529 clause no. 14.2.4a / laboratory equipment purpose is to determine the protection against splashing water, the oscillating tube is caused to oscillate through an angle of almost 180°on either side of the vertical at a speed of about 60°per second, while depending on regulation the specimen stands still or is turned at a convenient speed. Each of these tests lasts for example 10 minutes.
A complete test unit comprises a set of oscillating tubes as accessories, the oscillating appliance with the drive and-in the case of larger oscillating tubes-the opposite bearing. The oscillating tubes are manufactured with orifice radii of 200 mm to 1600 mm with a progressive ratio of 200 mm.
IP test setup conform to:
IEC60529 IPX3 IPX4 oscillation tube tester/ laboratory equipment ,IEC60598-1, IEC 60335-1, EN60335-1, IEC60950-1, GB4208, GB7000.1
Features:
1. All English Touch Screen Control;2. Fully conform to IEC60529 IPX3 IPX4 Tester;
3. Two different oscllation spray tester design;
3. Stainless steel nozzles removable for cleaning or replacing;
4. Water supply unit includes water filter, pump, flow meter, electromagnetic valve and switch valve.
5.Motorized turntable connected to instrument controller;
6.Stainless steel oscillation tubes;
7.Various size oscillation tubes/ laboratory equipment (R200/400/600/800/1000/1200mm);