IPX7 immersion tank tester for protection against the effectsbof temporary immersion in water  

Introduction:

AUTOSTRONG Supply kinds of Waterproof Teser, which is strictly designed and manufactured according to IEC60529, IEC60598, IEC60335, IEC60034, It have eight levels from IPX1 to IPX8( IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8)  

Application:

It is widely used in the authentication test organization for the products such as electrical & electronic products such as LED luminaires as well as in the relevant quality control department for the waterproof detection of the enclosures protection grades.

Technical Parameter:

Drip Box (AUTO-IPX1/2): The drip box is for IPX1 and IPX2 drip test IEC60529.The diameter of drip hole is 0.4mm, distant of drip hole is 20mm, sample can be over 150kg with turntable.

• Oscillation Tube Tester (AUTO-IP3/4): Swing Pipe Water Spray Test Equipment (JL-34): It is for IPX3 and IPX4 test, the semi-diameter of swing pipe is 1meter. IPX3 is 120degree and IPX4 is 180degree. The diameter of inside swing pipe is 0.4mm. The automatic sample rotating base diameter is 600mm and speed is 1~5rpm which controlled by PLC panel.

• Waterproof Jet Test Device (AUTO-ip5/6): Waterproof Jet Test Device (AUTO-56): With water supply device and jet nozzle diameter is 6.3mm (IPX5) and 12.5mm (IPX6). Diameter of hole is 6.3mm for IPX5 and 12.5mm for IPX6. The water speed is 12.5±0.626L/min for IPX55 and 100±5L/min for IPX6

•  Defense Immersion Test Device (Immersion tank Waterproof test Device) (AUTO-ip7):  It is for IEC60529/GB4208 IPX7 test. The top of the water tank size is 1000x1000x1200mm. The below of water tank height is 500mm. The sample testing base is max 120kg. It includes two temperature channels meter and digital display

.

•  Water Submersion Test Device( Immersion tank Waterproof test Device)(AUTO-ip8):  It is for IEC60529/GB4208 IPX8 test. It can measure 0~50m water depth. The water immersion size is diameter is 600mm and height is 1200mm. The compressive stress is 10 atmospheric pressures. 

 Waterproof Rating:

IPX-1 Protected against falling water Equivalent to 3-5mm rainfall per minute for a duration of 10 minutes. 
Unit is placed in its normal operating position. 

IPX-2 Protected against falling water when tilted up to 15 degrees - Same as IPX-1 but unit is tested in 4 fixed positions - 
tilted 15 degrees in each direction from normal operating position. 

IPX-3 Protected against spraying water - Water spraying up to 60 degrees from vertical at 10 liters/min at a pressure of 80-100kN/m2 for 5 min. 

IPX-4 Protected against splashing water - Same as IPX-3 but water is sprayed at all angles.

IPX-5 Protected against water jets - Water projected at all angles through a 6.3mm nozzle at a flow rate of 12.5 liters/min at 
a pressure of 30kN/m2 for 3 minutes from a distance of 3 meters. 

IPX-6 Protected against heavy seas - Water projected at all angles through a 12.5mm nozzle at a flow rate of 100 liters/min at 
a pressure of 100kN/m2 for 3 minutes from a distance of 3 meters. 

IPX-7 Protected against water immersion - Immersion for 30 minutes at a depth of 1 meter. 

IPX-8 Protected against water submersion - The equipment is suitable for continual submersion in water under conditions which are identified by the manufacturer.