Product Details

FRP/GRP Fiberglass Fire Protection Water Storage Tank

Product Description

FRP/GRP Fiberglass Fire Protection Water Storage Tank Introudction

Item	FRP/GRP Fiberglass Fire Protection Water Storage Tank
Material	GRP/FRP/SMC
Panel Size	1x1m, 1x0.5m, 0.5x0.5m
Panel Shape	Ball shape
Panel Thickness	5-22mm
Thickness Tolerance	±0.2mm
Volume	0.125m3 to 1500m3
Color	White,Blue,and so on
SMC water tank physical and chemical properties	Tensile strength (Mpa)≥60
	Bending strength (Mpa)≥100
	Bending modulus (Gpa)≥7.0
	Pap hardness≥60
	Bibulous rate,%≤1.0
	Glass fiber content,%≥28
Leakage	No leakage after filled with water
Packaging Details	Pallet, Steel frame, Wooden case, Container or as require
Delivery Details	Within 20 days

FRP/GRP Fiberglass Fire Protection Water Storage Tank Advantages

- Increased system durability and reliability
- Corrosion resistance
- Easier assembly
- Eliminated need for panel maintenance
- Easier tank maintenance
- Reduced heat transfer to the water

FRP/GRP Fiberglass Fire Protection Water Storage Tank Application

1). Potable drinking water storage

2). Rainwater storage

3). Emergency water Storage

4). Pump chambers

5). Hospital, buildings, building site, school and other place

FRP/GRP Fiberglass Fire Protection Water Storage Tank Installation

Step 1. Install steel footings on leveled concrete foundations.
Step 2. Align GRP panels to be pre-assembled.
Step 3. Place rubber sealant from ready-to-use roll between panels.
Step 4. Connect panels with bolts and nuts.
Step 5. Position bottom panel sections, and finish up base of tank.
Step 6. Position three sides of the tank.
Step 7. Position and fix top panels and if required, top support pipes and plates.
Step 8. Install reinforcement if required.
Step 9. Close up the tank with the fourth side.
Step 10. Finish the internal or external reinforcement.
Step 11. Fill and test.