Hot sale Digital Fetal monitor with TOCO/FHR/FM and Twins Function
Negotiable /Unit
Min.Order:1 Unit
Shenzhen Jumper Medical Equipment Co., Ltd.
New 12.1inch Fetal Monitor JPD-300P with fetal stimulator fuction
fetal heart rate Fetal Monitor with Ultrasonic Transducer TOCO Remote Marker
Hot sales quality,12.1inch TFT fetal monitor portable size for prenatal maternal monitor CE marked
the best fetal monitor 7inch TOCO,FM,FHR with twin option CE FDA approved
High quality fetal monitor FHR TOCO FM ECG NIBP SPO2 ,CE marked for sales
Jumper fetal monitor JPD-300P 12.1inch CE marked
Technical Date L8P fetal/maternal monitor Fetal Heart Rate: Transducer: Multi-crystals, pulsed doppler , high sensitively Strength: <5mW/cm2 Working frequency: 1.0MHz Signal processing: special DSP system and modern recognization. Measurement range: 50~210 bpm Alarm Range: High limit: 160,170,180,190 bpm Low limit: 90,100,110,120 bpm Maximum audio output power : 1.5 Watt Toco: Measurement range: 0~100 units Maternal SpO2 measure: Measure scope : 70%~99%. Measure accuracy: ±3% Pregnant HR Measure: Measure scope: 30bpm~240bpm Measure accuracy: ±2 bpm NIBP measure: a) NIBP-SYS (6.7~32.0Kpa)(50~240mmHg) b) NIBP-DIA (3.4~26.6Kpa)(25~200mmHg) c) NIBP-MEAN(2.0~24.0ka(15~180mmHg) NIBP Accuracy: ±1.1kPa(±8mmHg)or ±5% of the results, take the bigger one. Maximum Mean error : ±5mmHg Maximum Standard deviation 8mmHg Pulse Rate Accuracy: Maximum Mean error : ±2bpm Measure accuracy: ±2 bpm or ±5% of the results, take the bigger one. Measure mode: Manual ECG Heart Rate Measurement and Alarm Range: 15-300bpm Accuracy: ±1bpm Heart Rate Average: 8 beats Lead Selection: II Input: 5-lead ECG cable Sweep Speed: 25 mm/s Amplitude Selection: x1/4, x1/2, x1, x2, x4 Frequency Response: Monitoring: 0.5 to 35Hz (+0.4dB, 3.0dB) Defibrillation Protection: 5kV test Recovery Time Following Defibrillation: Less than 5 seconds Temperature: Measurement and Alarm Limit: 0-50°C Probe: Skin surface Unit: Celsius/Fahrenheit Accuracy: ±0.1°C(25°C ~45°C), ±0.2°C(0°C ~25°C or 45°C ~50°C) Resolution: 0.1°C Respiration Measurement Mode: Thoracic Impedance Respiration Rate: 0-150 bpm Waveform Display Speed: 25mm/s
Display: The LCD displays FHR, TOCO, FM , maternal parameters , time, date, volume and so on, It can store and play back the data. Power: a.c.100-240v, 50/60Hz or 16.8v Li-ION battery Power Consumption: < 20W Dimension: 350W×320D×85H(mm) Net weight:3.5kg Packing size:41.3×39-×24.5 (mm) Gross Weight:9Kg Environment Working environment: Temperature: +5°C ~ +40°C Humidity: < 85% Atmospheric pressure: 86kPa ~ 106kPa Transport and storage temperature: Temperature: -10°C ~ +55°C Humidity: < 93% Atmospheric pressure: 86kPa ~ 106kPa Transducer Acoustic Output: Under the requirements laid down in IEC 1157, 1992, the peak negative acoustic pressure does not exceed 1Mpa. The output beam intensity does not exceed 20mW/cm2 and the spatial-peak temporal-average intensity does not exceed 100mW/cm2 GEL: Viscous aqueous non-sensitizing , hypo-allergenic and non-irritating to skin. Indefinite shelf life, Bacteriostat (not sterile). |