Specifications

1.Material: EPDM, NR, CR...
2. Certiificate:ISO9001:2000
3. High quality, low price...

Product Description
CO500~1800 Super Cone Fenders
 It can endure server shear force; 
Structure is more reasonable and increased deflection, high-energy absorption and longer service life;
If has excellent life-stability in the Marine Environment.

Specifications:

Specifications	Hmm	Bømm	Cømm	Dømm	Eømm	F#×type	G#×ømm	WKg
CONE600H	600	900	810	510	390	6×M24	6×30	235
CONE700H	700	1050	945	595	455	6×M30	6×38	250
CONE800H	800	1200	1080	680	520	6×M36	6×44	540
CONE900H	900	1350	1215	765	585	6×M36	6×44	765
CONE1000H	1000	1500	1350	850	650	6×M42	6×50	1050
CONE1100H	1100	1650	1485	935	715	6×M42	6×50	1400
CONE1150H	1150	1725	1550	998	750	6×M42	6×50	1600
CONE1200H	1200	1800	1620	1020	780	8×M42	6×50	1950
CONE1300H	1300	1950	1755	1105	845	8×M48	8×56	2400
CONE1400H	1400	2100	1890	1190	930	8×M48	8×60	3060
CONE1600H	1600	2400	2158	1360	1040	8×M48	8×60	4600
CONE1800H	1800	2700	2428	1528	1170	10×M56	10×74	6600
CONE2000H	2000	3200	2920	2060	1710	10×M56	10×74	9560

 As a kind of 10 year aged products, the cone type rubber fender is becoming a trend of quay design, and becoming a new level for quay wall fender design. 

1. The energy absorption doubles comparing with the super cell rubber fender with same spec. 

2. In the case with similar reaction force and energy absorption, small size cone rubber fender come type fender can substitute relative large cone rubber fender
 super cell type fender, i. e., cone rubber fender 800h cone type fender can substitute cone rubber fender 1000H super cell fender, which can reduce the cost of 
quay wall construction. 

3. In the case of oblique berthing (less than a angle of 10 degree), the performance can not be reduced, which is preferred to cone rubber fender model. 

4. The frontal frame (steel frame) are installed in front of fenders, which can reduce the surface pressure against vessel hull. The surface can be limited below 
25t/m2, which is suitable to large vessel especially. 

5. The super high density polyethylene pads ate adhered to the frontal frame, which can reduce the friction factor between hull and fender to below 0.2, and can
 reduce the shear(horizontal force) exerted on fenders when vesselb Cone Rubber Fender for OffshorePlatformserth, which can prolong the service life of fenders. 

6. The frontal frame adopts water-tight structure with high strength and better anti-rust performance. 

7. The cone rubber fender is rarely damaged or impaired, because it never contacts the hull directly. 

High performence cone fender:
1. BV PIANC standard approved
2. No.1 best quality and service
3. Outstanding energy absorption

Main Description of  CO500~1800 Super Cone Fenders
The  Dock Rubber Fender-Super Cone Fender is the result of continuous product development. This fender design is based on the Cell Fender which was introduced to world-wide markets more than 25 years ago. This type of fender can be considered as the latest in state-of-the-art moulded fender products. Its refined geometry and conical shape result in a number of outstanding performance characteristics which include:

 

1. Exceptional good energy absorption to reaction force ratio (E /R)

 2. Outstanding energy absorption per weight of fender

 3. High shear stability which allows the fender to carry even larger panel weights without using chains

 4. Very good inherent resistance against shear forces due to its geometry and self-centering characteristics

 5. No reduction of energy absorption up to 10° compression angle

 6. Internal overload stopper as standard

 

Availability in heights between 500 and 1.800 mm, each in 4 different main hardness grades for the most precise fender selection.