Specifications

1) Biaxial geogrid
2) Materials: polyethylene, polypropylene
3) Tensile strength: 15KN - 100kn
4) Width: 1 - 6m...

Geogrids
      Geogrids improve the structural integrity of soils in roadways, walls and slopes by reinforcing
and confining fill materials and distributing load forces. Geogrids are the answer for designers, developers and contractors facing the challenges posed by sloping ground and soft subgrades.

      Geogrids help soils stand at virtually any desired angle in grade separation applications. In retaining wall and slope applications, geogrids can be combined with a wide variety of facing elements to produce the desired aesthetics for any project.
 
    Geogrids provide support for the construction of access roads, highways, berms, dikes and structure applications that previously required the use of expensive over-excavating or piling methods on weak subgrades. Geogrids are also used in base reinforcement applications to
reduce aggregate thickness requirements or extend roadway performance life.
Asphalt Reinforcement Geogrid     
       Asphalt Reinforcement Geogrids improve the structural integrity of roadways by confining and distributing load forces.  Asphalt Reinforcement Geogrids provide support for the construction of access roads, highways and applications on weak subgrades that previously required expensive over-excavating and replacing. Asphalt Reinforcement Geogrids are also used for road construction on stable subgrades to reduce aggregate thickness requirements and/or extend roadway performance life.

     When building permanent roads on a relatively firm foundation,  Asphalt Reinforcement
Geogrid provide enhanced performance or reduction of the road structure thickness.  Asphalt Reinforcement Geogrids change the way the base course performs under load. With their open grid structure and high tensile modulus, they interact with and confine base course materials, much like a rack confines balls in the game of pool.

       When weak subgrade conditions are encountered, Asphalt Reinforcement Geogrids are
used to provide a temporary road surface or a stable foundation for a permanent road.
Asphalt Reinforcement Geogrids work much like a snowshoe to distribute loads over a wider
area.
Technical parameters  

Item	TGSG15	TGSG20	TGSG30	TGSG40	TGSG45
Longitudinal tensile yield strength per long meter  KN/M≥	15	20	30	40	45
Horizontal tensile yield strength per long meter KN/M≥	15	20	30	40	45
Longitudinal yield elongation rate ≤%	13
Horizontal yield elongation rate ≤%	16
Tensilestrength when longitudinal elongation rate is 2% KN/M≥	5	8	11	13	16
Tension strength when horizontal elongation rate is 2% KN/M≥	7	10	13	15	20
Tensile strength when longitudinal elongation rate is 5% KN/M≥	8	10	15	16	25
Tension strength when horizontal elongation rate is 5% KN/M≥	10	13	15	20	22

 Applications