PLASTIC PP GRID
USD $0.5 - $3 /Square Meter
Min.Order:250 Square Meters
Hengshui Baoli Engineering Rubber Co., Ltd.
Sales Manager: Danny
Tel:+8615075828982/+8613833865001
Fax:+86 3187952199
Web: www.chinabaoli.ru
Companies: CHINA BAOLI GROUP
Address: No.396 Heping West Road,Hengshi City,Hebei Province,China.
Hot Sell PLASTIC PP GRID:
The material of PLASTIC PP GRID is similar with the material of unidirectional tension plastic geogrid. Its chemical property isnt active too. It is extruded by macromolecule polymers, and formed by longitudinal and horizontal tensions. This kind of material has high tension strength in both longitudinal and horizontal directions. This kind of structure provides a interlock system for the soil and is suitable for the improvement of roadbed with large area permanent load, such as treatment of soft soil foundation and reinforced earth structures.
Item | TGSG15 | TGSG20 | TGSG30 | TGSG40 | TGSG45 |
Longitudinal tensile yield strength per long meter KN/M bigger than | 15 | 20 | 30 | 40 | 45 |
Horizontal tensile yield strength per long meter KN/M bigger than | 15 | 20 | 30 | 40 | 45 |
Longitudinal yield elongation rate ≤% | 13 | ||||
Horizontal yield elongation rate ≤% | 16 | ||||
Tensilestrength when longitudinal elongation rate is 2% KN/M≥ | 5 | 8 | 11 | 13 | 16 |
Tension strength when horizontal elongation rate is 2% KN/M≥ | 7 | 10 | 13 | 15 | 20 |
Tensile strength when longitudinal elongation rate is 5% KN/M≥ | 8 | 10 | 15 | 16 | 25 |
Tension strength when horizontal elongation rate is 5% KN/M≥ | 10 | 13 | 15 | 20 | 22 |
Perfectly guality of Biaxial tensile plastic geogrid.
Performance of geo grid:
High tensile strength at both longitudinal & transverse direction
Application of the geogrid:
Soft foundation reinforcing for highway, railway,
Slop protecting projects, landfill side
Function of the geogrids:
1. Improve the bearing capacity of foundation;
2. Preventing cracking and subsiding;
3. Convenient to construct, reducing cost and maintaining expense
The properties of Biaxial Geogrids, made in Polypropylene (PP) with their square apertures, high tensile strength optimised geometry of nodes ribs make them equal to any other similar material. The reinforcing action of the Geogrids lies mainly in confining soil increasing its shearing resistance by a process of interlocking between the square ribs the soil. The load dispersal effect from the interlocking mechanism is highly effective can reduce sub-base thickness cost. These kind of Geogrids can be used with any kind of mechanical fill material. Two aperture size ranges are available for optimum matching with project fill.
Roads, railways, ports paved areas and so on.
High quality plastic geogrid.
grid: to reinforce permanent bearable base of roads and railways, embankment, slopes, tunnel, airways, parks, docks..