Medium wall heat shrinkable insulation sleeves(With glue)
Negotiable /Roll
Min.Order:1 Roll
Dongguan Weishida Insulation Materials Co., Ltd.
Medium wall heat shrinkable insulation sleeves
Features/Applications
HRA2 is medium wall tubing with hot melt adhesive, having properties of excellent insulating,environmental sealing, and resistant to impact and abrasion it is designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation and water proof are required.3:1 shrink ratio allows it easily fit over irregular shape and large connectors.
Resistant to UV
High electrical insulation
Superior mechanical protection
Minimum fully recovery temperature: 120°C
Standard color: Black, Red
technical data:
Property | Test Method | Typical Data |
Operating temperature | IEC 216 | -55 to +110°C |
Tensile strength | ASTM D2671 | ≥14MPa |
Tensile strength after aging | ASTM D 2671/150°C, 168hrs. | ≥12MPa |
Elongation at break | ASTM D2671 | ≥400% |
Elongation at break after aging | ASTM D 2671/150°C, 168hrs. | ≥300% |
Density | ASTM D792 | 1.05g/cm3 |
Longitudinal shrinkage | UL224 | 0 to -10% |
Dielectric strength | IEC243 | ≥20kV/mm |
Volume resistance | IEC93 | ≥1014Ω.cm |
Eccentricity | ASTM D2671 | <30% |
Copper stability | ASTM D2671 | Pass |
Resistance to stress cracking | ASTM D1693 (50°C) | No Cracking |
Water absorption | ISO 62/23°C,14days | <0.15% |
Thermoplastic adhesive | ||
Water absorption | ISO 62 | <0.2% |
Softening point | ASTM D E28 | 85°C |
Peel strength (PE) | DIN 30672 | 4 N/cm |
Copper stability | ASTM D 2671 | Non-corrosive |
Resistance to fungus and decay | ISO 846 | Pass |