SAW Welding Flux
RAAJMELT-SS
General Purpose stainless steel submerged arc welding Flux
CLASSIFICATION : - DIN 32 522
B.I. = 1.10
CHARACTERISTICS : - Raajmelt-SS is an special basic welding flux used for welding stainless steels and heat resistant steels in combination with the wire electrodes of AWS/SFA 5.9 in respect to the weld metal, That flux is neutral. This means that with the correct wires, low carbon steels can be welded. Flux has no chromium compensation, despite this there is very little loss of chromium. The metallurgical behavior in respect to silicon and manganese is neutral.
TYPICAL APPLICATION : - Raajmelt-SS For joint welding on high alloy Cr-Ni steels type: AISI 304, 304L, 316, 316L, 347, 321, 318, 410, 430 etc.
Drying requirement: - : Redrying recommended at 250-300°C for one hour before use.
| SiO2+TiO2 | CaO+MgO | Al2O3+MnO | CaF2 | S | P |
| 10-20 | 20-30 | 20-30 | 30 | ≤0.07 | ≤0.07 |
| UNDER Wires | C | Mn | Si | Cr | Ni | Mo | Cb |
| RAAJSAWER308L | <.03 | <1.50 | <0.90 | <19.50 | <9.00 | - | - |
| RAAJSAWER309L | <.03 | <1.50 | <0.90 | <22.00 | <11.00 | - | - |
| RAAJSAWER316L | <.03 | <1.50 | <0.90 | <18.50 | <12.00 | <2.00- | - |
| RAAJSAWER347 | <.07 | <1.50 | <0.90 | <19.50 | <9.00 | - | <8XC |
| RAAJSAWER430 | <.07 | <0.75 | <0.90 | <11.50 | - | - | - |
| UNDER Wires | UTS (N/mm²) | 0.2% proof (N/mm²) | 1.0%proof (N/mm²) | EL % | IMPACT at +20°C J |
| RAAJSAWER308L | <500 | <320 | <350 | <35 | <75 |
| RAAJSAWER309L | <550 | <350 | <370 | <35 | <75 |
| RAAJSAWER316L | <520 | <350 | <370 | <35 | <75 |
| RAAJSAWER347 | <520 | <320 | <370 | <30 | <75 |
| RAAJSAWER430 | <800 | <320 | <350 | <20 | <50 |
