two component thermostable adhesive for filter factory
USD $1.6 - $2 /Kilogram
Min.Order:1000 Kilograms
Anping County Sanlian Filtering Equipment Co., Ltd.
1. Usage:
oil filter core, special shaped filter core, bonding between the water filter core cap
and filter paper, bonding the cap and center tube.
2. The test result for glue joint strength
Features | Material-A | Material-B |
Physical nature | White Viscous liquid | Light yellow liquid |
Color | Based on your request to configure | |
Tensile strength(steel-steel) | 7.25Mpa(Standard≥1.00Mpa) | |
Shear strength(steel-steel) | 10.17Mpa(Standard≥1.00Mpa) | |
Paper filter stretching resistance | 847N(paper broken)(Standard≥500N) | |
Mixture ratio | 6:1 | |
Working temperature | 15°C-35°C | |
Viscosity: | 30-45kps.s | |
Storage | 3-6 months |
3. Features:
In the experimental test which resistance to high oil temperature, it has shown that the use
of this adhesive paste in the filter was soaked in the oil at high temperature of 135°C for 192 hours, no shrinkage crack or degumming.
4. instruction:
1) The surface of end cap is supposed to be washed clean for getting rid of oil stain and
dust, and dried completely. Any oil stain, water or other impurities should not exist on the
surface, or the adhesive strength will be affected.
2) Before the charge mixture, material-A in the barrel should be stirred or inverted, material-
A and material-B are mixed at the mixture ratio of 6:1 and stirred evenly.
3) Inject appropriate adhesive into the end cap and wait for a moment. The adhesive should
be smeared every corner of cap surface
4) Insert filter paper (center tube) into the end cap and check the surface of two adhesive
pieces. After complete contact, give a little pressure on the top of end cap and hold for a
moment.
5) After curing for around 2 hours, reverse and adhere another end cap. It can be packed
after other 10 hours, and then 2 days later, you can use the filter.
Welcome to take our sample to test the properties ,so make the right desicion!!!