Two Component AB adhesive; High quality PU sealant for HEPA; Appliable to be used by PU Dispensing Machine or by hand.

Heat Resistant, Good flexibility.

Technical parameters:

Glue A 40kg, Glue B 20kg in plastic barrel

 We provide the best quality of filter adhesive, and we provide professional technical instruction along with all of our adhesive. We have 24 hour technical line to help you solve any problem you may inccur during your using.

  Anping County Sanlian filtering equipment Co., Ltd is located in Anping county, which is famous for "International Wire Mesh World". We manufacture filter making machine, filter adhesive; such as Filter paper pleating machine, PU machine, Filter cover gluing machine, Mesh slitting machine, PU adhesive, PVC adhesive, AB glue etc, for Auto filters and industry air filter cartridges, also supply Wire mesh, Plastic molds, Non woven filter media and varieties of filter material. 


Founded in the early 1990s, we are committed to working with the progress of science and technology pay great attention on cultivate talent and product development, to make high quality products. Our products are not only selling to the domestic market, but also sell well to international market, such as Southeast Asian, Africa, South America and so on. 


Our mission is to provide quality products to the automotive filter manufacturer that will support their filters to help them expand market. More importantly, these products will result in economic and environmental benefits. We sincerely hope to work together with you to develop and jointly create a brilliant career, a better tomorrow!

1) The surface of end cap is supposed to be washed clean for getting rid of oil stain and 

dust, and dried completely. Any oil stain, water or other impurities should not exist on the 

surface, or the adhesive strength will be affected.

2) Before the charge mixture, material-A in the barrel should be stirred or inverted, material-

A and material-B are mixed at the mixture ratio of 6:1 and stirred evenly.

3) Inject appropriate adhesive into the end cap and wait for a moment. The adhesive should

be smeared every corner of cap surface

4) Insert filter paper (center tube) into the end cap and check the surface of two adhesive 

pieces. After complete contact, give a little pressure on the top of end cap and hold for a

 moment.

5) After curing for around 2 hours, reverse and adhere another end cap. It can be packed 

after other 10 hours, and then 2 days later, you can use the filter.