Product Details

Product Description

original manufacturer of pu glue for air filter

SLAP125

Technical parameters:

Item	Component A	Component B
Appearance	cream viscous liquid (original color)	light brown liquid
Density 20℃ (g/ml)	1.02±0.02	1.20±0.05
Viscosity 25℃ (mPa.S)	1000±100	50±20
Storage	6 months at temperature (15℃ to 30℃) Stored indoors in the tightly sealed drums
Mixing ratio by weight	100	25
Cream time	15-20s
Demold time	10±2min
Shore A hardness	30±5(adjustable)
Color	Orange(adjustable)
Tensile strength	≥0.9 MPa
Elongation at break	≥130%

Our Services

high quality products; 24-hour online techinical support, in-site guide and instruction when necessary

Company Information

Anping County Sanlian filtering equipment Co., Ltd is located in Anping county, which is famous for "International Wire Mesh Base". We manufacture filter making machine such as Filter paper pleating machine, PU machine, Filter cover gluing machine, Mesh slitting machine, and also we manufacture specialized filter adhesive including PU adhesive, PVC adhesive, AB glue etc, for Auto filters and industry air filter cartridges. Besideds, we supply Wire mesh, Plastic molds, Non woven filter media and varieties of other filter materials.

Founded in the early 1990s, we have been committed to making high quality products by continuously improving science and technology levels and cultivating talents. Our products are not only well sold in the domestic market, but also exported to international market, such as Southeast Asian, Middle East, Africa, South America and so on.

Our mission is to provide quality products to the automotive filter manufacturer, thus help them expand their market share. More importantly, these products will result in economic and environmental benefits. We sincerely hope to work together with you and jointly create a win-win business.

FAQ

1.How to use the products to its maxium effect?

Instructions:

1. Material-A should be stirred or shaked when you injected it into the machine.

2. Material-A and material-B are mixed at the mixture ratio of 100:25 and the best work temperature is 25°C

3. The material’s temperature should be controlled 24°C-28°C then you can start operation

4. Brushing the Mold with release agent before using the mould (notice: the new plastic mould can be wiped free)

5. If the response is inadequate, please measure the ratio material-A and material-B.

2. How to contact us?