Product Details

Stainless Steel Solar Water Heater Tank

Technical Data

Itrm name	stainless steel water tank
Technics	stainless steel panel mould
Reinforcing material	non
Basic Materia	SUS302,SUS201,SUS410,SUS430 panels
Auxiliary Material	Gel coat resin, firming agent accelerating agent and abrasive material.
Parameters	Tensile strength (Mpa): ≥70 Bending strength (Mpa): ≥100 Barcol hardness (Mpa): ≥60 Flexural modulus (Mpa): ≥5900 Water absorption: ≤1.0% Fiberglass content: ≥25
Specification	Water tank size 10.05.01.0m, 15.020.02.0m, 100.030.02.0m, etc SMC board size: 1.01.0m, 1.00.5m, 0.5m*0.5m Wall board thickness: 2mm,3mm,4mm,5mm,6mm,8mm etc
Measure	15-1500m3
Characteristic	1, leak-proof Due to the material is fiberglass reinforce plastic with high density, adding the sealing tape is high performance with non toxic, so it's leak-proof tank. 2,Long lifetime Ourwater tank with maximum distortion of the sidewall is less than 1 percent of the height, maximum distortion of the bottom center is less than 10mm. The normal durable lifetime is more or less 30 years.
Application	Our water tank is widely used in factory, Enterprises, government,hotel, motel, restaurant, residence as storage facility. Also use it as equipment in drinking water treatment and fire water supply.

Specifications

Large scale solar hot water system normally incorporate a big insulated stainless steel hot water tank that stores the solar heated water, the stored hot water can be used for domestic use or space or pool heating. Depending on the system design a single tank may incorporate both solar and auxiliary heating (gas, electric etc) or a dedicated solar tank may supply pre-heated water to a second tank that is heated by traditional energy sources.

Tank designs vary somewhat between countries and markets depending on climate, local regulations and system design norms. SANENG company is able to supply a range of hot water tanks to suit most commercial application either SANENG branded or using quality local brands where appropriate.

1 Features of SANENG Atmospheric Hot Water Tank

1. SANENG atmospheric solar hot water tank is a kind of economical storage tank designed especially for large-scale open-loop solar water heating systems, heat exchange coil can be designed inside SANENG atmospheric tank for indirect closed loop solar water heating, even more heat exchangers is available in storage tank for various applications

2. For outlet hot water, a suitable pressure pump is used for to increase hot water pressure;

3. Advanced argon arc welding is adopt for inner tank to bear more hydraulic water pressure and have longer working life.

4. Every storage tank has been filled with water to test water leakage, make sure a quality delivery.

5. All SANENG atmospheric solar hot water tank are well insulated with high-density PU foam, comparing to traditional mineral wool this is about 40% better in heat preservation, for a normal household tank this equals to saving approximately 450 kWh energy per year.

6. Big power electric heaters can be installed inside tank for automatic auxiliary heating.

7. Quality magnesium anode installed in tank for additional corrosion protection with longer service life.

8. SANENG company offers OEM and ODM production as per special requirements, and offer technical support for installation with more than 10 years project experience.

2 Advantages of SANENG Atmospheric Hot Water Tank

Comparing with pressure hot water tank;

1. Most economical tank;

2. More convenience in tank carring and installation;

3. More convenience in maintenance with a cover on top;

4. More wide application suitable for all kinds of solar collector system;

4 Our Service

Fast response: Your inquiry will be replied within 24 hours via e-mail or online messenger;

Technical support: You have more than 10 years experience from SANENG SOLAR for product suggestion, installation guidance, market analysis, etc.

OEM & ODM: We welcome OEM & ODM requirements for solar collector, storage tank, installation frame, and even for some outsourcing equipments;

Sample checking: In spite of quality control in production, samples will be selected and installed to check prior to delivery

Minimum order quantity: We offer sample sample manufacturing for customers to check SANENG quality and service;

Shipping service: SANENG company offers to arrange goods shipment to abroad ocean port or inland site, and if necessary to make goods insurance, customs clearance, etc;

Import certificates: SANENG company offers to make Certificate Origin CO, FORM A, FORM E, FORM F, customs certification, etc.

5 Remarks

1.Lead-time: 7-15 working days after receiving payment

2.Payment Term: T/T, L/C, Western Union

3. Warranty: 5 Years for the full system, 15 Years for the vacuum tube, and 1 year for accessories

4. Trade Term: FOB, CFR and CIF

5. Contact: Ms. eva he Mobile: (00)86-13511390503 Skype: eva201423