Product Details

newly designed solar boiler for Mexico and Latin Amecica

Product Feature:
1). Cheap and reliable solution, Simple structure, Easy installation.
2). High-efficiency.
3). Scientific and reasonable design.
4). Withstand water pressure no more than 0.05MPa
5). Electric heater 1.5KW option.

Specifications

1). Inner tank: SUS304-2B stainless steel by argon protect welding& thickness: 0.4~0.5mm
2). Outer tank:Color steel coated anti-corrosion layer &thickness:0.4~0.5mm;
3). Insulation layer: Imported polyurethane foamed with overall high pressure equipment &thickness:50~60mm;Density:42~45KG/m3;
4). Vacuum tube:SS-AlNX/Cu or Al-N/Al high selective coating tube &thickness:1.6mm
5). Freeze protection:-25oC
6). Hair resistance: 25-35mm
7). Bracket: hot galvanized steel painted with anti-corrosion layer &thickness:1.5mm; Freeinstalled on inclined or flat roof; Wind stress: 183.5km/h without damage
9). All install documents are free
10) Option Feeder tank:
Inter-tank: SUS304-2B stainless Steel

Outer-tank: Stainless steel/ color steel
Capacity: 8L/20L
11). Option Controller: SP26 (More details)

Note

1. If possible , you can install a temperature displayer to get the temperature and control the electricity heater . Or , you can not install this . it is both ok . As we know , in South Africa, some people do not use

the controler ,some people use .

2. This system will keep the water in the main tank be full all time . Also the water in the main tank will not be able to boil . Because the assistant tank will load cold water in when the water boil .

3. When the user is in shower , plz close the cold water loading valve , or the water in main tank will become colder and colder when you are in Shower . after the shower ,plz open it .

4. if you want to install the sensor , plz do not install the sensor into the water . it will reduce the life of the sensor . Actually we do not make hole on the inner tank for the sensor . plz install the sensor beside the inner tank . in this way , the water can not affect the sensor ,the sensor can use for long time .

Working principle

Solar vacuum tube was evacuated into the tank, the coating inside of tube can absorb more

than 92% heat energy from sunshine. The cold water in water tank flows into the tube and

become hot, because of different density between cold and hot, there will be a natural circulation

in the tube. Hot water will float back to tank.

The polyurethane heat insulation layer can keep the water warm about 2 days without any sunshine.

Consumer can enjoy comfortable bathe anytime.

Packaging & Shipping

1.sample export wooden case packing
ntainer export carton case with foam packing
3.7-15 working days