Heat Pipe High Pressure Solar Water Heater
USD $100 - $500 /Set
Min.Order:1 Set
Haining Sanneng Solar Water Heater Co., Ltd.
Thermosyphon vacuum tube non pressure water solar heater with assistant tank
Hot sell evacuated tube collector pressurized copper coil solar energy water heater
CE certification copper coil Pressurized Home Solar System Solar Water Heater
Evacuated tube pre-heated copper coil pressurized Solar Energy Water Heater
Cheap thermosyphon house used solar water heaters solar power product
Heat Pipe High Pressure Solar Water Heater
Heat Pipe Vacuum Tube | Size (mm) | Φ58*1800/ Φ47*1500 |
Tube (PCS) | 10 / 12 / 15 / 18 / 20 / 24 / 30 / 36 | |
Glass tube | Vacuum Tube with three-target coating Cu/SS-ALN(H)/SS-ALN(L)/ALN | |
Heat Pipe | Red copper pipe evacuated & filled with heat-transfer liquid | |
Heat conduction | Shaped aluminum wrapping tightly contacted with heat pipe tube | |
Pressure Water Tank | Capacity | 90L ~ 500L for hot water storage tank |
Inner tank | Food-grade stainless steel SUS304-2B / SUS316 / enamel | |
Pipe socket | Copper pipe sockets pre-installed in storage tank for heat exchange | |
Insulation | High-density polyurethane foam with 80~90 hours heat preservation | |
Tank shell | Painted color steel (stainless steel is available) | |
Bracket | Shaped strong galvanized steel adaptable to flat and slope roof | |
Accessories | T/P valve, Check valve, Dustproof seals, Adjustable tube holder, Stainless screws | |
Auxiliary Equipments | Electrical Heater, Intelligent Controller, Magnesium anode, Pipe&fittings | |
Tilt Angle | 25 ~ 50° | |
Anti-freezing | (-) 30°C | |
Hail Resistance | Φ25mm diameter | |
Working Pressure | 6.0 bar |
1 Working Principle
The selective coating on the inner cover of the evacuated tubes converts solar energy into heat energy and transfers heat to the heat pipes by aluminum fins, the liquid in the heat pipe changes into vapour which rises to the condenser. The heat then passes through the heat exchanger and the vapour becomes liquid, returning to the base of the heat pipe. The heat conducts to the heat transfer liquid (antifreezing liquid or water ) via a copper pipe. This transference of heat into the liquid creates a
continuous circulation as long as the collector is heated by the sun.
2 Features
1.It can withstand pressure of tap water when it works.
2.There is no need to wait.
3.Completely automatic operation.
4.Drinking water quality to promote life quality.
5.Temperature preservation can last for 80hours.
6.Without volatile tubes.
7.Without encrusting, long usage life.
3 Advantages
Comparing with Non-pressure and Pre-heat solar water heater
1. Heat pipe tubes for in-direct solar water heating, more safe, fast, anti-freezing.
2. No system drainage when one or several tubes are broken.
3. High pressure tank connecting with city water directly to get high pressure hot water.
4. No need to install on roof top to get hydraulic water pressure.
5. Less heat loss with safety valve closed tank.
6. Almost maintenance freely system.
Comparing with split heat pipe solar water heater
1. More lower cost.
2. More simple structure and installation.
Comparing with pressure flat panel solar water heater
1. Higher efficiency collector, much lower heat loss.
2. Super anti-freezing performance for cold weather.
3. No system drainage when one or several tubes are broken.
4. Convenience in parts carrying and installation.
4 Our Service
Fast response: Your inquiry will be replied within 24 hours via e-mail or online messenger;
Technical support: You have more than 10 years experience from SANENG SOLAR for product suggestion, installation guidance, market analysis, etc;
OEM & ODM: We welcome OEM & ODM requirements for solar collector, storage tank, installation frame, and even for some outsourcing equipments;
Sample checking: In spite of quality control in production, samples will be selected and installed to check prior to delivery;
Minimum order quantity: We offer sample sample manufacturing for customers to check SANENG quality and service;
Shipping service: SANENG company offers to arrange goods shipment to abroad ocean port or inland site, and if necessary to make goods insurance, customs clearance, etc;
Import certificates: SANENG company offers to make Certificate Origin CO, FORM A, FORM E, FORM F, customs certification, etc;
5 Remarks
1.Lead-time: 7-15 working days after receiving payment.
2.Payment Term: T/T, L/C, Western Union.
3. Warranty: 5 Years for the full system, 15 Years for the vacuum tube, and 1 year for accessories.
4. Trade Term: FOB, CFR and CIF.
5. Contact:eva he Mobile: (00)86-13511390503 Skype:eva201423