Specifications

PRODUCT FEATURES

l  Compliant with SFP+ MSA

l  Compliant to 802.3ae 10GBASE-ER

l  Compliant to SFP+ SFF-8431 and SFF-8432.

l  Hot-pluggable SFP footprint

l  Built-in digital diagnostic functions

l  Maximum Link Length of 40 km

l  Single power supply 3.3V

l  Class 1 laser product complies with EN 60825-1

l  Case temperature range: -5°C to 70°C.

l  Power dissipation < 1.5W

APPLICATIONS  

l  10GBASE-ER / EW

DESCRIPTION

The OPTFOCUS ODP-XX10G-40 transivers are designed to transmit and receive optical data over single mode optical fiber for link length 40km. Digital diagnostic functions are available via an I2C.This module is designed for single mode fiber and operates at a nominal wavelength of ITU Grid, C Band DWDM wavelength. It is with the SFP+ 20-pin connector to allow hot plug capability. The transmitter section uses a DWDM EML laser and is a class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses a PIN detector and a limiting post-amplifier IC.

PRODUCT SELECTION

ODP-XX10G-40

C-band λc Wavelength Guide Pin Descriptions

Ⅰ. Absolute Maximum Ratings  

Ⅱ. Electrical Characteristics (Tcase = -5 to 70°C, VCC = 3.14 to 3.46 Volts)

   Notes:

1. Connected directly to TX data input pins. AC coupled thereafter.  
2. Or open circuit.
3. Into 100 ohms differential termination.  
4. These are unfiltered 20-80% values
5. Loss Of Signal is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected.