Product Details

Specifications

10G SFP+ WDM transceiver
BASE-BX, multirate, SM 20km,
1330nm TX/ 1270mm RX BIDI, LC simp., DMI , Cisco komp.

10Gb/s BIDI SFP+ Transceiver

PRODUCT FEATURES

FEATURES

l Up to 10.7Gbps Data Links

l Single Mode LC Receptacle Bi-directional Transceiver

l Up to 20km transmission on SMF

l Power dissipation<1.0W

l 1270nm DFB laser and 1330nm PIN receiver

l 2-wire interface with integrated Digital Diagnostic monitoring

l EEPROM with Serial ID Functionality

l Compliant with FC_PI_4 REV 7.0

l Compliant with SFP+ MSA with duplex LC connector

l Single + 3.3V Power Supply and LVTTL Logic

l Operating case temperature:0~+70ºC

APPLICATIONS

l 10GBASE-BX at 10.3125 Gb/s

l 10GBASE-BX at 9.953 Gb/s

l 1000 Base-LX Ethernet

l 8XFC at 8.5Gbps

l 4XFC at 4.25Gpbs

l 2XFC at 2.125Gpbs

l 1xFC at 1.0625Gbps

PRODUCT DESCRIPTION

OFSBP-2710-20D is hot pluggable 3.3V Small-Form-Factor transceiver module . It designed expressly for high-speed communication applications that require rates up to 10.7Gb/s, it designed to be compliant with SFF-8472 SFP+ MSA. The module data link up to 20KM in 9/125um single mode fiber.

The optical output can be disabled by a LVTTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal(LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner.

1. Absolute Maximum Ratings

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Storage Temperature	Ts	-40	-	85	ºC
Storage Ambient Humidity	HA	5	-	95	%
Operating Relative Humidity	RH	-	-	85	%
Power Supply Voltage	VCC	-0.3	-	4	V
Signal Input Voltage		Vcc-0.3	-	Vcc+0.3	V

2. Recommended Operating Conditions

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Ambient Operating Temperature	TA	0	-	70	ºC	Without air flow
Power Supply Voltage	VCC	3.14	3.3	3.47	V
Power Supply Current	ICC	-	-	300	mA
Data Rate	BR		10.3125		Gbps
Transmission Distance	TD		-	20	km	Note (1)
Coupled fiber	Single mode fiber					ITU-T G.652