Salt Spray Test Painted Parts
USD $2,825 - $10,432 /Unit
Min.Order:1 Unit
Xi'an LIB Environmental Simulation Industry Electronics Technology Co., Ltd.
Salt Spray Test Painted Parts
Salt Spray Test Painted Parts
Technical Parameters
Model | S-150 | S-250 | S-750 | S-010 | S-016 | S-020 |
Workroom dimension (mm) | 450*600*400 | 600*900*500 | 750*1100*500 | 850*1300*600 | 850*1600*600 | 900*2000*600 |
External dimension (mm) | 800*1080*1080 | 870*1400*1150 | 1150*1750*1400 | 1250*2000*1550 | 1250*3000*1550 | 1300*2700*1550 |
Technical structure | ||||||
Temperature range | Ambient ~60℃ | |||||
Humidity range | 95% ~ 98% RH | |||||
Temperature fluctuations | ± 0.5 ℃ | |||||
Temperature deviation: | ± 2.0 ℃ | |||||
Test time | 1~999 hours, settable | |||||
Spray deposition | 1~2ml / 80cm2 · h | |||||
Spray type | Continuous / Periodic | |||||
Control system | ||||||
Temperature Controller | LED display, P.I.D+S.S.R. microcomputer integrated controller | |||||
Temperature sensor | platinum resistance. PT100 / MV | |||||
Spraying time | 1~99 hours, settable | |||||
Salt fog collected | With standard funnel and metering cylinder | |||||
salt water filtration | With water filter near the suction tubes( Avoid the nozzle blockage) | |||||
Salt water preheating | The temperature for salt water should be equal with workroom temperature | |||||
Spraying system | Tower spray and nozzle without crystallization(Fog is more fine and uniform distribution) | |||||
Material | ||||||
Exterior material | Glass fiber reinforced plastics; (corrosion resistance, Anti-aging, high strength) | |||||
Interior material | Glass fiber reinforced plastics; (corrosion resistance, Anti-aging, high strength); | |||||
Standard configuration | round bar / 1 piece; sample holder / 1 piece; spray nozzle / 2 pieces; funnel / 2 pieces; | |||||
safety device | Humidifier dry-combustion protection, independent over-temperature protection, | |||||
Sealing | Water seal structure, no salt fog overflow | |||||
Standard | ISO 3768/3769/3770, DIN50021-75, ASTM B-117, JIS H8502, IEC 68-2-11,IEC68-2-52, MIL-STD-750, | |||||
Power Supply | AC220V 50HZ; / AC380V 50HZ |
Features:
l. Fog Chamber and Bracket
Fog chamber is made from Glass fiber reinforced plastics,
Chamber material is corrosion resistance, Anti-aging, high strength.
Hydrostatic hood seal
Test specimen bracket
2. Atomizer Tower and Nozzle
Corrosion resistance atomizer tower.
Quartz spray nozzles
Atomizer tower spray and nozzle without crystallization.
Collectors in fog chamber.
3 .Distinctive spring door hinge design makes the chamber door easy to open and close.
4. There is no leak from the baths around.
5.NSS/ASS test.
6. Standerds:
ISO 3768/3769/3770.
DIN50021-75,
ASTM B-117,
JIS H8502,
IEC 68-2-11,
IEC68-2-52,
MIL-STD-750,
IEC-68-2-11,
ISO 9227
7. Control Panel
LED display, P.I.D+S.S.R. microcomputer integrated controller
5.7" programmable color touch display controller (option)
8. Sensors
Temperature sensor PT-100 A class
Humidity sensor Dry and wet bulb sensors
Resolution: temperature: ± 0.01 ℃; humidity: ± 1%RH
9.Safety Protection
Independent over-temperature protection,
Water shortage protection
Over-current protection
Refrigerant high-pressure protection switch
Over-current circuit breaker
Earth leakage protection and so on
10.Options
Air compressor
Device for SO2 gas testing
Salt spray test combined with temperature and humidity test
11.Installation Conditions
Ambient Temperature 5℃~+30 ℃ ≤85% RH
Test chamber should be away from wall over 80 cm to
adequately ventilate and heat dissipation
Power Supply and Wiring
380V, 50 Hz 10% +/-
Three-phase five little system
Skype:lib_melody
website:welcome to visit / to find more details.
Three years Warranty ; Lifelong Service
Question: I need chambers very urgently, do you have stock ?
LIB: we have no stock, our standard delivery is10 days , if you need in urgent , we can speed up the production ,will short to 8days , customer should notice before order .
Question: How about your LIB payment terms?
LIB: Our payment is 50% with order, and 50% before delivery.
Question: Can LIB arrange delivery to our office (Lab)?
LIB: Yes, LIB can arrange shipping to your country and to your office ( Lab) by sea, by air, by train and by truck on conditions FOB, CFR, CIF, DDU and DDP for customers .
Question: Can we visit your plant before order?
LIB: We welcome and sincerely invite you or your team to visit our plant, we will help you to arrange hotel and pick you up from airport.
Question: Have you sold chambers to our country?
LIB: Now LIB climatic test chambers sold to more than 25 countries, like USA, Canada, Russia, UK, Italy, Germany, European Union, India, Pakistan, Philippines, Singapore, Thailand Vietnam, Thailand, Iran, Brazil ……and so on .
Question: Can you arrange installations and commissioning in our lab?
LIB: Firstly, for standard chamber we had 5 days commissioning before shipping , you just need link power in your lab, then can start to operate; Secondly; we had detailed operation manual with chamber , any problems you can find and solve in it; Thirdly, some of customized chambers we should to install and teach your team to operate .
Question: How about your warranty?
LIB: It is three years warranty for every LIB’s chamber, and lifetime service. Now LIB has 8 agents in the world, and in Europe (Italy) , America (USA) Middle East(Iran) had service office, we can in first time to solve your problems.
Key words: Salt Spring testing machine