Product Details

Saline test equipment

Product Description

Salt fog corrosion test chamber

Application

This product series can simulate the marine climate and can be used to test the salt fog resistant performance of materials, products and their coatings. They can also be used to evaluate the quality of the coatings.

Advantages,

1.The interior and exterior sides of the chamber are made of FRP glass fiber reinforced plastics, which are corrosion resistance, Anti-aging, high strength, P.P high temperature resistance also, and easy to clean.

2.Wall-mount spray system can be freely placed without occupying any effective test space.

3.With an imported quartz nozzle, it has the characteristics of smooth interior wall, accurate angle and no crystalline in long-time spraying.

4.Distinctive spring door hinge design makes the chamber door easy to open and close.

5.And there is no leak from the baths around.

Saline test machine meets standards:

ISO 3768/3769/3770; DIN 50021-75; ASTM B-117; JIS H8502; IEC 68-2-11;IEC68-2-52; MIL-STD-750

Saline test equipment specification

Model	S-150	S-250	S-750	S-010	S-016	S-020
Inner dimension (mm)	450600400	600900500	7501100500	8501300600	8501600600	9002000600
Exter dimension (mm)	80010801080	87014001150	115017501400	125020001550	125030001550	130027001550
Technical structure
Temperature range	Ambient ~60℃
Humidity range	95% ~ 98% RH
Temperature fluctuations	± 0.5 ℃
Temperature deviation:	± 2.0 ℃
Test time	1~999 hours, settable
Spray deposition	1~2ml / 80cm2 · h
Spray type	Continuous / Periodic
Control system
Temperature Controller	LED display, P.I.D+S.S.R. microcomputer integrated controller
Temperature sensor	platinum resistance. PT100/ MV
Spraying time	1~99 hours, settable
Salt fog collected	With standard funnel and metering cylinder
salt water filtration	With water filter near the suction tubes( Avoid the nozzle blockage)
Salt water preheating	The temperature for salt water should be equal with workroom temperature
Spraying system	Tower spray and nozzle without crystallization(Fog is more fine and uniform distribution)
Material
Exterior material	Glass fiber reinforced plastics; (corrosion resistance, Anti-aging, high strength)
Interior material	Glass fiber reinforced plastics; (corrosion resistance, Anti-aging, high strength); P. P high temperature

Standard configuration	round bar / 1 piece; sample holder / 1 piece; spray nozzle / 2 pieces; funnel / 2 pieces;
	metering cylinder / 2 pieces
safety device	Humidifier dry-combustion protection, independent over-temperature protection,
	water shortage protection, over-current protection, refrigerant high-pressure protection switch,
	over-current circuit breaker, earth leakage protection and so on.
Sealing	Water seal structure, no salt fog overflow
Standard	ISO 3768/3769/3770, DIN50021-75, ASTM B-117, JIS H8502, IEC 68-2-11,IEC68-2-52, MIL-STD-750,
	IEC-68-2-11, ISO 9227
Power Supply	AC380V 50HZ

Salt fog corrosion controller

workroom

Saline test equipment spray tower

Air Compressor

Packaging & Shipping

Our Services

In our after sales as follows,

Warranty : 3 year. If the equipment is under the ordinary usage and arise any hardware problem which caused by product itself, rather than human error, we will offer the repair to you.

* Firstly, we can provide the spare parts with you. And also provide the solution about the troubleof the products.

* Secondly, Please send back the apparatus ,which will be repaired by our company.

* Lastly, we would like to appoint our technical engineer to your company to repair the apparatus.