Product Details

Specifications

Easy setting,aLL-in-one control
Harmonic suppression;positioning stabilization reduction
Vibration control,CE/ISO improved

QS7AA010M is a new generation of general-purpose servo motor driver, which is optimized and improved on the basis of QS6 series servo driver. Adhering to the series QS6 series servo driver excellent quality, more stable and more convenient. More mature and stable, rich and complete information. The servo drivers add to 485 new communication functions, more convenient and reliable connection with the host computer or controller software.

QS7AA010M Servo Controller Feature:

Fully retain the advantages characteristics of QS6 series servo driver.
AC sine wave control, torque smoothly and without pulsation.
2500 ppr incremental photoelectric encoder, high positioning accuracy, rotary positioning accuracy up 1/10000R.
Speed ratio up to 1:5000, from low speed to high speed torque characteristics are stable.
High-speed arithmetic processing FPGA, maximum motor speed up to 5000RPM.
A rich complete set of parameters that can be configured to run different operating modes, so meet different demand.
Position, speed, torque control mode, using widely.
Adopt intelligent space vector control algorithm (SVPWM), could produce greater torque and less noise.
Up to three times the overload design, with a load capacity greater.
Perfect protection: over current, overvoltage, overheating and encoder failure, etc.
Perfect condition monitoring functions, such as the position error, motor speed, feedback pulse, command pulse and so on.

QS7AA010M Servo Controller Paramenters:

Input Voltage	AC220V -15%~+10%
Driver Current	10A
Matching Motor	≤400W Low-inertia Motor
Using Temperature	Work:45°C Storage:-40°C~55°C
Relative Humidity	40%~80% with no condensation
Atmosphere	86-106kpa
Control Mode	Position control; JOG control; Speed control; Torque control; Position and speed control; Inside pulse control; Electric tool carrier control
Pulse Command	Pulse+ Direction; CW + CCW Pulse; Two-phase AB orthogonal pulses
Control Precision	0.01%
Response Frequency	≤200Hz
Pulse Frequency	≤500kHz
Speed Ratio	1:5000
Regenerative Brake	Internally Installed
Electronic Gear	1/30000~30000/1
Overload Capacity	≤300%
Feedback Pulse	2500p/r, Frequency division can be set arbitrary within 0-128
Display Function	Motor speed, motor current, motor torque, motor position, the position deviation, the number of command pulses, the pulse frequency, the straight-line speed, input and output diagnostic
Protection Function	Over speed, over current, overvoltage, under voltage, overload, super bad, encoder fault, the temperature is too high, the internal chip failure, module failure