Product Details

Product Description

1.AC sine wave control, torque smoothly and without pulsation.

2.2500 ppr incremental photoelectric encoder, high positioning accuracy, rotary positioning accuracy up 1/10000R.

3.Speed ratio up to 1:5000, from low speed to high speed torque characteristics are stable.

4.High-speed arithmetic processing FPGA, maximum motor speed up to 5000RPM.

6.Position, velocity, torque control mode, using widely.

7.Adopt intelligent space vector control algorithm (SVPWM), could produce bigger torque and less noise.

8.Up to three times the overload capacity

9.Over current, overvoltage, overheating and encoder failure, tection Function

10.PC software monitor and debugging servo driver

Model	UMG-A3050
Input Voltage	Single phase 220V-/+10% for main cricuit and 220V single phase for control circuit
Driver current	50A
Matching motor	2000watt,2300watt,2600watt,2900watt,380watt
Using Temperature	Work:45℃ Storage:-40℃~55℃
Relative Humidity	40%~80% with no condensation
Atmosphere	86-106kpa
Control Mode	1.Position control 2.JOG control 3.Speed control 4.Torque control 5.Position and speed control etc.
Control Mode
Pulse Command	1.Pulse+ Direction 2.CW + CCW Pulse 3. Two-phase AB orthogonal pulses
Pulse Command
Control Precision	0.01%
Response Frequency	≤200Hz
Pulse Frequency	≤500kHz
Speed Ratio	1:5000
Regenerative Brake	Internally Installed
Electronic Gear	1/30000~30000/1
Overload Capacity	≤300%
Feedback Pulse	2500p/r, Frequency division can be set arbitrary within 0-128
Feedback Pulse
Display Function	Speed, current, torque,position, the position deviation,pulses No., the pulse frequency etc.
Display Function
Protection Function	Over speed, over current, overvoltage, under voltage, overload, super bad, encoder fault, the temperature is too high, the internal chip failure,etc.
Protection Function