Specifications

Hot sale high quality cement rod mill
-High-efficiency
-Energy saving
-High quality ISO9001-2008,Big capacity

Hot sale high quality cement rod mill

 

 

The brief introduction of cement rod mill:

 

Rod mill is the key equipment for secondary grinding after crushing. And it is suitable for grinding all kinds of ores and other materials, no matter wet grinding or dry grinding.Besides, it is mainly applied in many industries, such as ferrous&non-ferrous metal mine, building materials, chemical, electric power, coal, traffic, light industry, etc. In our company, this series of high-efficiency ball mill adopts rolling bearing support instead of sliding bearing support with bearing bush. Therefore, it can save energy by 10-20%. According to different discharging ways, it can be divided into two kinds, grate type andoverflow type.

 

Working principle of cement rod mill:

For an equivalent grind, a rod mill uses less steel than a ball mill because of the lower speed and better contact between the media and ore. The rod charge must be maintained in good working condition, and broken and worn rods must be removed. Rod mills usually require greater operator attention. It is important that the rods stay essentially parallel to one another. If rods become misaligned, grinding action is lost and, more importantly, rod tangles occur. Maximum rod length is limited to about 6.1 m (20 ft). This in turn limits the length, diameter, and capacity of rod mills. The heavier rods acting upon the lifters and liners result in greater wear on the millliners.

 

Features of cement rod mill:

1) is an efficient tool for grinding many materials into fine powder.
2) widely used in building material, and chemical industry.
3) can be used b oth dry and wet.

4) As the barrel rotates, the material is crushed between the individual pieces of grinding

media that mix and crush the product into fine powder over a periodof several hours.
5) The longer the ceramic mill runs, the finer the powder will be.
6) Our rod mill have been used to grind glass, powder food products, create custom

varnishes, make ceramic glaze, powder various chemicals.

 

The technical data of cement rod mill:

 

Type	Cylinder  specification  (mm)			Cylinder (r/min)	Weight (t)		Material-in size (mm)	Material-out size (mm)	Capacity (t/h)	Power (kw)	Overall dimension (L*W*H) (mm)	Weight (kg)
	Diameter	Length
MB0918	900	1800	29.0-31.3			2.3	<25	0.16-5	1.6-6	22	5900*2365*2015	6200
MB0924	900	3400	29.0-35.4			3.1	<25	0.16-5	2.9-10	30	5250*2480*2127	6600
MB1224	1200	2400	27.0-34.0			6.5	<25	0.16-5	5.0-13	55	5829*2867*2540	13500
MB1530	1500	3000	26.5-29.5			11.5	<25	0.16-5	6.0-25	95	7635*3329*2749	18170
MB1830	1800	3000	21.6-22.8			17.5	<25	0.16-5	4.8-28	155	8007*3873*3023	35000
MB2130	2100	3000	19.0-21.0			23.5	<25	0.16-5	12.6-30	155	9000*2800*3800	43000
MB2136	2100	3600	19.0-21.0			23.2	<25	0.16-5	15.1-45	210	9600*2800*3800	58000
MB2736	2700	3600	17.2-18.5			47.0	<25	0.16-5	25.0-75	400	10870*6100*4950	71500
MB2740	2700	4000	17.2-18.5			51.0	<25	0.16-5	27.7-90	420	11500*6100*4950	73600

 

 

 

 

 

 

 

 

 

 

 

Your desire, we design. We are one of the most professional manufacturers of cement rod mill.