Hot sale high quality rod rolling mill
USD $5,000 - $999,999,999 /Set
Min.Order:1 Set
Henan Hongji Mine Machinery Co., Ltd.
Hot sale high quality rod rolling mill
The brief introduction of rod rolling mill:
Rod mill is the key equipment for secondary grinding after crushing. And it is suitable for grinding all kinds of ores and other materials, no matter wet grinding or dry grinding.Besides, it is mainly applied in many industries, such as ferrous&non-ferrous metal mine, building materials, chemical, electric power, coal, traffic, light industry, etc. In our company, this series of high-efficiency ball mill adopts rolling bearing support instead of sliding bearing support with bearing bush. Therefore, it can save energy by 10-20%. According to different discharging ways, it can be divided into two kinds, grate type andoverflow type.
Working principle of rod rolling mill:
For an equivalent grind, a rod mill uses less steel than a ball mill because of the lower speed and better contact between the media and ore. The rod charge must be maintained in good working condition, and broken and worn rods must be removed. Rod mills usually require greater operator attention. It is important that the rods stay essentially parallel to one another. If rods become misaligned, grinding action is lost and, more importantly, rod tangles occur. Maximum rod length is limited to about 6.1 m (20 ft). This in turn limits the length, diameter, and capacity of rod mills. The heavier rods acting upon the lifters and liners result in greater wear on the millliners.
Features of rod rolling mill:
1) is an efficient tool for grinding many materials into fine powder.
2) widely used in building material, and chemical industry.
3) can be used b oth dry and wet.
4) As the barrel rotates, the material is crushed between the individual pieces of grinding
media that mix and crush the product into fine powder over a periodof several hours.
5) The longer the ceramic mill runs, the finer the powder will be.
6) Our rod mill have been used to grind glass, powder food products, create custom
varnishes, make ceramic glaze, powder various chemicals.
The technical data of rod rolling mill:
Type | Cylinder specification (mm) | Cylinder | Weight | Material-in size | Material-out size | Capacity | Power | Overall dimension | Weight | |||
Diameter | Length | |||||||||||
MB0918 | 900 | 1800 | 29.0-31.3 | 2.3 | <25 | 0.16-5 | 1.6-6 | 22 | 5900*2365*2015 | 6200 | ||
MB0924 | 900 | 3400 | 29.0-35.4 | 3.1 | <25 | 0.16-5 | 2.9-10 | 30 | 5250*2480*2127 | 6600 | ||
MB1224 | 1200 | 2400 | 27.0-34.0 | 6.5 | <25 | 0.16-5 | 5.0-13 | 55 | 5829*2867*2540 | 13500 | ||
MB1530 | 1500 | 3000 | 26.5-29.5 | 11.5 | <25 | 0.16-5 | 6.0-25 | 95 | 7635*3329*2749 | 18170 | ||
MB1830 | 1800 | 3000 | 21.6-22.8 | 17.5 | <25 | 0.16-5 | 4.8-28 | 155 | 8007*3873*3023 | 35000 | ||
MB2130 | 2100 | 3000 | 19.0-21.0 | 23.5 | <25 | 0.16-5 | 12.6-30 | 155 | 9000*2800*3800 | 43000 | ||
MB2136 | 2100 | 3600 | 19.0-21.0 | 23.2 | <25 | 0.16-5 | 15.1-45 | 210 | 9600*2800*3800 | 58000 | ||
MB2736 | 2700 | 3600 | 17.2-18.5 | 47.0 | <25 | 0.16-5 | 25.0-75 | 400 | 10870*6100*4950 | 71500 | ||
MB2740 | 2700 | 4000 | 17.2-18.5 | 51.0 | <25 | 0.16-5 | 27.7-90 | 420 | 11500*6100*4950 | 73600 |
Your desire, we design. We are one of the most professional manufacturers of rod rolling mill.