Specifications

12.1" high resolution TFT LCD
Standard 6 parameter
Over pressure protection
Network capacity
Built in rechargeable battery

As a leading professional manufacturer of ECG machines, Holter Systems, Patient Monitors, Vital sign Monitors, Pulse Oximeters and Fetal Dopples, we have multiple options of 1/3/6/12 channel ECG machines, with features & specifications for PM-200A(Portable Multiparameter Patient Monitor) as follows.

 

 

Features

 

 

* 12.1 inch high brightness colorful TFT LCD

* Simultaneous display of 7 channel waveform by one screen

* Dual NIBP with over pressure protection

* Analysis of real time ST segment and arrhythmia

* Standard configuration: ECG, NIBP, RESP, SPO2, 1-TEMP, PR, drug dose calculation, OXYCRG

* Optional configuration: 12 lead ECG, 2-TEMP, IBP(single/dual channel), ETCO2(side stream/main stgream), built in thermal printer, ICG and CO

* Standard RJ-45 socket to support networking capacity of maximum 66 beds and compatibility with HIS

* Digital SPO2 enables effective examination in case of active patient and low infusion as well interference caused by electrosurgical unit

* Compact and portable design allows uninterrupted operation with its built in rechargeable battery

 

 

Specifications

 

 

ECG

Lead Mode: 3/5/10 lead

Lead selection: I, II, III, aVR, aVL, aVF, V- // I, II, III // I, II, III, aVR, aVL, aVF, V1~V6

Gain: 2.5mm/mV, 5mm/mV, 10mm/mV, 20mm/mV, 40mm/mV

Input impedance: ≥5.0 Mohm

CMRR: DIAG ≥85dB, MON ≥105dB, OPS ≥105dB

Frequency response: DIAG 0.05~75Hz, MON 0.5~25Hz, OPS 1~15Hz

HR range: 10~300 bpm

ECG analysis: Standard analysis of ST segment, QT and arrhythmia

Resolution: 1 bpm

Accuracy: ±1% or ±1 bpm, whichever greater

Lead off alarm: Available

Sweep speed:12.5mm/s, 25mm/s, 50mm/s

Alarm range: 10~300 bpm, continuously adjustable between high/low limit

Trend: 168 hour

 

NIBP

Measurement method: Automatic oscillometry

Operation mode: Single (manual), cycle (automatic), rapdi (continuous)

Measurement time: Selectable

Measurement parameter: Systolic/diagnostic/mean/PR

Measurement range: 0 ~ 300 mmHg for adult, 0 ~ 235 mmHg for pediatric, 0 ~ 135 mmHg for neonate

Cuff pressure range: 0 ~ 280 mmHg

PR range:  40 ~ 240 bpm

Inflation time: Less than 40 second for standard adult cuff

Resolution: 1 mmHg

Interval for cyckled measurement: 1, 2, 3, 4, 5, 10, 15, 20, 30, 45, 60, 90 minutes, 2, 4, 8 hours

Alarm: Available

Data recall: 750 groups for recall and display

 

 

RESP

Measurement method: Impeance between RA-LL (R-F)

Impedance range: 0.5 ~ 3 ohm

Measurement range: 0 ~ 180 bpm

Precision: ±2 bpm

Gain: x1, x2, x4

Alarm range: 0 ~ 180 bpm, continuously adjsutable between upper limit and lower limit

Scanning speed:  6.25/mms, 12.5mm/s, 25mm/s

Apnea alarm: Available

 

 

SPO2

Probe:Dual wave length LED 

Measurement range: 0 ~ 100% 

PR range: 20 ~ 250 bpm 

Resolution: 1% 

Alarm range: 0 ~ 100%, continuously adjustable between upper limit and lower limit 

 

 

TEMP

Measurement Range: 0 ~ 50 ºC 

Resolution of display: ±1 mmHg 

Precision: ±0.1 ºC 

Connection cable: Compatible with YSI-4400 

Alarm range: 0 ~ 50 ºC  , continuously adjsutable between upper limit and lower limit

 

 

IBP (Optional)

Measurement Range: 45 ~ +300 mmHg

Resolution: 1 mmHg  

Precision: ±1 mmHg or 4% of the reading, whichever bigger; ±4 mmHg or 5% of the reading, whichever bigger, excluding the error of the energy converter

Sensitivity of transducer: 5uV/V/mmHg, 2% 

Impedance of traneducer: 300 ~ 3000 ohm

Insulation resistance: > 5000 Mohm/1000V

Breakdown voltage: >4000v/ac, 50-60Hz

Pressure classification: ART/PA/CVP/LAP/RAP/ICP

 

 

ETCO2 (Optional) 

Measurement: 0 ~ 100 mmHg 

Resolution: 0.1 mmHg (0.01%) 

Precision: 0 ~ 40 mmHg, +0.3%;  40 ~ 100 mmHg, +1.0%

 

 

 

Gallery