As a leading professional manufacturer of ECG machine, Holter System, Patient Monitor, Vital sign Monitor, Pulse Oximeter and Fetal Doppler, we have multiple options of Multiparameter patient monitor, with details for PM-100A ( 2016 Multiparameter patient monitor with 10.4" LCD and CE certificate ) as follows.

• 10.4 inch high brightness colorful TFT LCD
• Simultaneous display of 3/5 lead ECG by one frame
• Dual NIBP with over pressure protection
• Analysis of real time ST segment and arrhythmia
• Standard parameter of ECG, NIBP, RESP, SPO2, TEMP, PR, drug dose calculation and OXYCRG
• Optional configuration IBP, ECTO2, built in printer
• Maximum 72 hour graphic and tabular trend with data storage
• Networking capacity
• Digital SPO2 for effective examination in case of active patient, low infusion and interference from electrosurgical unit
• Compact and portable design allows uninterrupted operation with its built in rechargeable battery

• Lead mode:  3/510 lead ECG input
• Lead selection: I, II, III// I, II, III, aVR, aVL, aVF, V-// I, II, III, aVR, aVL, aVF, V1 ~ V6
• Gain:  2.5mm/mV, 5mm/mV, 10mm/mV, 20mm/mV, 40mm/mV
• Input Impedance: >50Mohm
• CMRR: DIAG>85dB, MON>105dB, OPS>105dB
• Frequency response:  DIAG: 0.05 ~75Hz, MON: 0.5 ~ 25Hz, OPS: 1 ~ 15Hz
• Polarizing voltage:  ±300 mV d.c.~  ±600mV d.c.yle> ±300 mV d.c.
• Leakage current:  <10 uA
• ECG signal range:  ±6.0 mV
• Baseline recovery:  <5 s After Defi. (MON or OPS mode)
• Insulation:  Breakdown Voltage 4000VAC 50Hz/60Hz
• Lead off indicaiton: Available
• Sweep speed:  12.5mm/s, 25mm/s, 50mm/s

SPO2

• Range of measurement:  0 ~ 100%
• Resolution: 1%
• Precision:  At 70~100%, ± 2%,  At 35~69%, ± 3%,  At 0~34%, unspecified
• Range of alarm:  0~100%, continuously adjustable between high limit and low limit
• Alarm indication:  Sound and light alarming
• Type of sensor:  Dual bandwidth light emitting diode

TEMP

• Range of measurement:  0.0~50.0ºC
• Resolution of display:  0.1ºC
• Unit:  Celsius (ºC), Fahrenheit (ºF)
• Precision:  ±0.1ºC
• Connecting cable:  Compatible with YSI-4400
• Range of alarm:  0.0~50.0ºC, continuously adjustable between high limit and low limit
• Alarm indication:  Sound and light alarming

RESP

• Method:  Impedance between RA-LL (R-F)
• Measuring impedance range:  0.5 ~3 Ohms
• Baseline impedance range:  500~4000 Ohms (50~120 kHz exciting frequency)
• Range of measurement:  0~120 bpm

  2016 Multiparameter patient monitor with 10.4" LCD and CE certificate