Specifications

GENERAL DEFINITION

• Oil reservoirs are storage tanks that take oil from oil separator and provide its return to compressor’s case through the oil level regulator.
•  Oil reservoir prevents liquid circulation to oil level regulators and thanks to it changes in oil flow caused by compressors are immediately prevented.
•  Oil reservoirs must be mounted at a level higher than compressor’s case. 
• Select an oil reservoir according to number of compressors to be used or oil volume of the unit.
•  In case if oil level is lower than level of sight glass on the oil reservoir, put additional oil.    

Connection Parts

• We determined Input and Output connections according to volume of products.
• 3/8” SAE Rotalock valve connection is used in standard products.  
•  Different connection may be used upon request.
• We determine models of Sight Glass according to diameter of products.
• Sight glasses may be decreased and increased up to desired number.
• 2 Sight Glasses are available in standard products.
• We strongly recommend using  Check Valve in products. 
• There is a Check Valve connection after certain volume. See technical table for details.  

DRAWING&PICTURE

1 - Inlet Connection  ( 3/8" SAE Rotalock Valve )

2 - Outlet Connection  ( 3/8" SAE Rotalock Valve )

3 - Check Valve Connection (3/8" SAE  )

4 - Sight Glass

Application  and internal design are clearly shown in above.

TECHNICAL DATA

•  Working Pressure[PS] : 33Bar
• Test Pressure [PT]  : 48Bar
• Allowable Temperature [TS]: Min.- 10°C/Max.-130°C
• Color [RAL] : 5009
• General Tolerans [mm]: ± 3

Contact information