Product Details

About us

About product

Introduction

CFIA filters are a range of angle-way and straight-way filtets which are carefully designed to give favourable flow conditions.The design makes the filter easy to install,and ensure quick filter inspection and cleaning.

CFIA filters are used ahead of automatic controls,pumps, compressors etc.for inntial plant start-up and where permanent flitration of refrigerant is required.The filter reduces the risk of undesirable system breakdowns and reduces wear and tear on plant components.

CFIA filters are required with a screen mesh of stainless steel,available in sizes 100,150,250 and 500μ(microns*), (US 150,100,72,38 mesh*) .

Features

Appliable to all common refrigerants and all noncorrosiv gases/liquids.
Filter net of stainless steel mounted direct without extra gaskets means easy servicing.
CFIA fliter housing compatible with housings belonging to other Castle products.A compatibility overview can be obtained from local Castle Distributor.
Mesh is the number of threads per inch. μ(microns)is the distance beween two threads 1μ=1/1000mm).
CFIA 50-200(2-8in.)can be equipped with a magnetic insert for detention of iron particles and other magnetic particles.
Each filter clearly marked with type,size and performance range .
Housing and bonnet of low temperature steel.
Temperature range -46°C/+150°C .
Pressure range:CFIA:40barg(580psig)

Technical data

Refrigerants Applicable to all common refrigerants including flammable refrigerants and all non-corrosive/liquids. For further information please see installation instruction for CFIA.

Pressure range

ing pressure: CFIA:40barg(580 psig)

Design Connections

Available with the following connections:

Butt-weld ANSI(B36.10 Schedule 80), DN15-40(1/2-11/2 in.)
Butt-weld ANSI(B36.10 Schedule 40), DN50-200(1/2-8 in.)
Socket weld (ANSI B 16.11),DN15-DN50(1/2-2in.)

Filter Insert

A filter grid and filter net of stainless steel ensure long element life.The filter net offers a very high degree of cleanability.

Housing

Made of special,cold resistant steel.

Flow coefficient(DIN/ANSI)

Size	μ	mesh	wire mm	wire in	free space %	screen area
						plain elements		pleated elements
						cm²	in²	cm²	in²
15-20 (½"-¾)	100		0.068	0.003	35	25	3.9	45	7.0
	150	100	0.10	0.004	36	25	3.9	45	7.0
	250	72	0.10	0.004	51	25	3.9	45	7.0
	500	38	0.16	0.006	57.6	25	3.9	45	7.0
25-40 (1"-1½”)	100		0.068	0.003	35	71	11	160	25.0
	150	100	0.10	0.004	36	71	11	160	25.0
	250	72	0.10	0.004	51	71	11	160	25.0
	500	38	0.16	0.006	57.6	71	11	160	25.0
50(2")	100		0.07	0.003	35	71	11	200	31.2
	150	100	0.10	0.004	36	87	13.5	200	31.2
	250	72	0.10	0.004	51	87	13.5	200	31.2
	500	38	0.16	0.006	57.6	87	13.5	200	31.2
65(2½")	150	100	0.10	0.004	36	127	19.7	305	47.6
	250	72	0.10	0.004	36	127	19.7	305	47.6
	500	38	0.16	0.006	57.6	127	19.7	305	47.6
80(3")	150	100	0.10	0.004	36	205	31.8	450	70.2
	250	72	0.10	0.004	51	205	31.8	450	70.2
	500	38	0.16	0.006	57.6	205	31.8	450	70.2
100(4")	150	100	0.10	0.004	36	370	57.4	790	123.2
	250	72	0.10	0.004	51	370	57.4	790	123.2
	500	38	0.16	0.006	57.6	370	57.4	790	123.2
125(5")	150	100	0.10	0.004	36	510	79.1	1105	172.4
	250	72	0.10	0.004	51	510	79.1	1105	172.4
	500	38	0.16	0.006	57.6	510	79.1	1105	172.4
150(6")	150	100	0.10	0.004	36	726	112.5	1600	249.6
	250	72	0.10	0.004	51	726	112.5	1600	249.6
	500	38	0.16	0.006	57.6	726	112.5	1600	249.6
200(8")	150	100	0.10	0.004	36	1315	203.8
	250	72	0.10	0.004	51	1315	203.8
	500	38	0.16	0.006	57.6	1315	203.8