Product Details

Specifications

LZ -Variable-Area fuel Oil Flow Meter
1>high pressure and Temp.
2>flange,thread screw connection
3>measure range 10:1

LZ -Variable-Area Metal Tube Flow Meter Metal Flowmeter

Megnetism Fiter

If there are some ferromagnetism granule in the medium, a magnetism filiter must be installed in the entrance of the flowmeter .There are some magnetism sticks which are ranked in helical in the magnetism filter, it can cutt down pressure loss maxinunly.Every magnetism stick is coverer with PTPE, prevent from corresiom by medium.

I type:Flange conneetion, height :100mm

IItype :Inpacted installation, heigh:50mm

Antivibrator(gas)

If the flow (pressure)in the entrance of the flow meter is unsteaediness.in order to ensure that the flowmeter can work steadily and credily for long time when we measure clean gas we can install an antivibrator with high tech manufacture .On the measure component.

It is unfit for using an antivibrator if there are some tiny granule or dust in the gas .Under this civcumstance , it is request the pressure in the entrance is bigger than 5times of flowmeters pressure loss so we can ensure that flowmeter can work nomally. For diameter D15, we can level off the flow by pressure adjuster.

Technical parameters of LZ-series flowmeter

Measure Range	Water(20°C)(2.5-1000)L/h) Air(20°C,1.101325Mpa)90.07-750)m3/h
Range Ratio	10:1
Accurate Degree	1.5 2.5
Fluid Woring Pressure	DN15-DN50:4.0Mpa DN80-DN100:1.6Mpa
Coat Working Pressure	1.6Mpa
Fluid Working Temperature	-80°C~+200°C(For PTFE ≤+85°C)
Connection Type	Flange connection or screw thred connection,flange standard refer to GB/T9119 ANSI150lbs,300lbs,HG20592-20635,other standard flange can be made by the user’s requirement).
Environment Temperature	-25°C~+55°C
Medium Viscidity	Dn15≤5Mpa.s, Dn25-100≤250Mpa.s
Electricity Signal output	Output Signal 4-20mA)
	Linear Accuracy:1%
	Temperature influence 0.5%/10°C
	Power Supply (13-30)VDC
	Power Supply Consume ≤250mW
Restrict Alarm	Power Supply 220 (±10%) VDC
	Power Loss ≤3W
	Working Temperature -25°C~+60°C
Explosion-proof Grade	lb CT5

Technical parameters of LZ-series flowmeter

Anticorrosion Diameter (DN mm)	Normal Diameter (DN mm)	Measure Range		Maximum Pressure Loss
Anticorrosion Diameter (DN mm)	Normal Diameter (DN mm)	Air20°Cm3/h	Waterl/h	Air(Kpa)	Water MPa
15	15	0.05-0.5	1.6-16	7.0	6.4
		0.07-0.7	2.5-25	7.1	6.5
		0.11-1.1	4.0-40	7.2	6.5
		0.18-1.8	6.0-60	7.3	6.6
		0.28-2.8	10-100	7.5	6.6
		0.40-4.0	16-160	8.0	6.8
		0.70-7.0	25-250	10.8	7.2
		1.00-10	40-400	10	8.6
		1.60-16	60-600	14	11.1
			80-800		14
25	25	3.00-30	100-1000	7.7	7.0
		4.50-45	160-1600	8.58	8.0
		7.00-70	250-2500	12	10.8
		11-110	400-4000	19	15.8
			500-5000		16.2
50	50	18-180	600-6000	8.6	8.1
		25-250	1000-10000	10.4	11
		40-400	1600-16000	12.6	17
80	80	50-500	2000-20000	15.5	6.3
80	80	75-750	2500-25000	17.2	8.1
100	100	100-1000	4000-40000		9.5
100	100	160-1600	6000-60000		10
125	125	250-2500	8000-80000		16
125	125		10000-100000		20
150	150	300-3000	12-120m3/h		20
150	150	400-4000	15-150m3/h		25

Company apperance