high quality and low cost clamp on flow meter/acid flow meter
USD $250 - $750 /Piece
Min.Order:1 Piece
Yuyao Kingtai Instrument Co., Ltd.
high quality and low cost clamp on flow meter/acid flow meter
LZ-series metallic rotameter is one of variable-area flowmeter with simple structure,work reliable,wide application field,high precision,convenient installing,it is suitable for compatible liquids,gases.
It is with LCD and 4-20mA electricity signal output,restrict alarm and many kinds of signal,compared with other flowmeters,this series has the characteristics of high-pressureproof,high-temperature proof,safety,ocular reading etc,it is suitable for chemical industry,petroleum,metallurgy,power plant,environmental protection,medical science.
Measure Range | Water(20°C)(2.5-1000)L/h) Air(20°C,1.101325Mpa)90.07-750)m3/h |
Range Ratio | 10:1 |
Accurate Degree | 1.5 2.5 |
Fluid Woring Pressure | DN15-DN50:4.0Mpa DN80-DN100:1.6Mpa |
Coat Working Pressure | 1.6Mpa |
Fluid Working Temperature | -80°C~+200°C(For PTFE ≤+85°C) |
Connection Type | Flange connection or screw thred connection,flange standard refer to GB/T9119 ANSI150lbs,300lbs,HG20592-20635,other standard flange can be made by the user's requirement). |
Environment Temperature | -25°C~+55°C |
Medium Viscidity | Dn15≤5Mpa.s, Dn25-100≤250Mpa.s |
Electricity Signal output | Output Signal 4-20mA) |
| Linear Accuracy:1% |
| Temperature influence 0.5%/10°C |
| Power Supply (13-30)VDC |
| Power Supply Consume ≤250mW |
Restrict Alarm | Power Supply 220 (±10%) VDC |
| Power Loss ≤3W |
| Working Temperature -25°C~+60°C |
Explosion-proof Grade | lb CT5 |
Technical parameters of LZ-series flowmeter
Anticorrosion Diameter (DN mm) | Normal Diameter (DN mm) | Measure Range | Maximum Pressure Loss | ||
Air20°Cm3/h | Waterl/h | Air(Kpa) | Water MPa | ||
15 |
15 | 0.05-0.5 | 1.6-16 | 7.0 | 6.4 |
0.07-0.7 | 2.5-25 | 7.1 | 6.5 | ||
0.11-1.1 | 4.0-40 | 7.2 | 6.5 | ||
0.18-1.8 | 6.0-60 | 7.3 | 6.6 | ||
0.28-2.8 | 10-100 | 7.5 | 6.6 | ||
0.40-4.0 | 16-160 | 8.0 | 6.8 | ||
0.70-7.0 | 25-250 | 10.8 | 7.2 | ||
1.00-10 | 40-400 | 10 | 8.6 | ||
1.60-16 | 60-600 | 14 | 11.1 | ||
| 80-800 |
| 14 | ||
25 | 25 | 3.00-30 | 100-1000 | 7.7 | 7.0 |
4.50-45 | 160-1600 | 8.58 | 8.0 | ||
7.00-70 | 250-2500 | 12 | 10.8 | ||
11-110 | 400-4000 | 19 | 15.8 | ||
| 500-5000 |
| 16.2 | ||
50 | 50 | 18-180 | 600-6000 | 8.6 | 8.1 |
25-250 | 1000-10000 | 10.4 | 11 | ||
40-400 | 1600-16000 | 12.6 | 17 | ||
80 | 80 | 50-500 | 2000-20000 | 15.5 | 6.3 |
75-750 | 2500-25000 | 17.2 | 8.1 | ||
100 | 100 | 100-1000 | 4000-40000 |
| 9.5 |
160-1600 | 6000-60000 |
| 10 | ||
125 | 125 | 250-2500 | 8000-80000 |
| 16 |
| 10000-100000 |
| 20 | ||
150 | 150 | 300-3000 | 12-120m3/h |
| 20 |
400-4000 | 15-150m3/h |
| 25 |
Company apperance
Packing detail