Linux development board with wifi card size ARM board Linux discussion board
USD $50 - $200 /Piece
Min.Order:1 Piece
Zhejiang Qiyang Intelligent Technology Co., Ltd.
AM335x-ARM Cortex-A8 series processors low power consumption ARM board gbit
Four floors of PCB high precision process ARM board Linux embedded layout
Marine Navigator ARM board open source B to B connectors ARM board
Industrial control equipment Centralized Meter Reading Terminal GUI interface board
Embedded c 8 x 8 keypad interface 10/100M self-adaptive network ARM board
Packaging Details: | 1 piece in a Box |
---|---|
Delivery Detail: | Within 3 Working Days After The Payment Is Reached |
Embedded linux primer kernel board support mixing board
1.ATMEL AT91SAM9G45CPU, ARM9 processor;
2.128MB DDR2 SDRAM;
3.128MB NandFlash.
Core Module is designed by 6-floor PCB; the volume is only card size; together with CPU, DDR2 RAM, NandFlash, DataFLash, network; using 5V dc power supply, low power consumption; B to B(2*100)connectors lead various commonly used interfaces; suitable for customer batch use.
Evaluation Board is a general standard reference design board for QY-9G45P, with commonly used interfaces, such as TFT-LCD, touch screen, VGA, camera, matrix keypad, external bus interface, SPI, PWM, high-speed USB HOSTDevice, SD card, RS232485 serial port, audio, MIC, etc.; support +6V~+25V wide range voltage power supply; can provide a complete design material for user to develop or custmize.
CPU Processor
• ATMEL AT91SAM9G45, ARM926EJ-S Core
• 400MHz
DDR RAM Memory
• 128MB DDR2 RAM, 133MHz, 32bit data bus
FLASH Storage
• On-board 512K DataFlash (DB45041D)
• On-board 128M*8bits NandFlash (K9F1G08U0B)could change a large capacity or industrial chip according to customer's requirement
Interfaces
• 2*100 pin 0.8mm spacing B to B(the connectors are 350°C high temperature-tested and seismic-tested)
Other Onboard Resources
• DM9161 net chip, support 10M/100M Ethernet with MII mode, more compatible than RMII;
• 1.8V, 3.3V, 5.0V voltage input
PCB Specification & Size
• Using six floors of PCB high precision process, and has the best electrical properties and anti-jamming performance
• 74 x 53 x 1.5mm
Working Parameters
• Working temperature: -20°C~ 70°C (batch user could customize -40°C~ 85°C)
• Humidity Range: 5%~ 95%, Non-Condensing
Low Power Consumption
• 5v Dc power supply, low power consumption, <1W
Support OS
• Linux2.6.30 + QT2.3/QT4
• WindowsCE 6.0
No. | Item | Function |
---|---|---|
J3 | Earphone output interface | Audio output |
J4 | Line input interface | Audio input |
J5 | MIC input interface | MIC input |
J6 | TFT-LCD, Touch screen | Expand color LCD screen, drive 4-wire resistive touch screen |
J8 | VGA interface | VGA video output, and display connection |
J9 | Debug serial port | Download, communication |
J10 | COM 1 | 232485 reuse |
J11 | COM 2 | 232485 reuse |
J12 | COM 3 | RS232 |
J13 | COM 4 | RS232 |
J14 | USB 2.0 device | High-speed USB(480MHz), used to download program |
J15 | USB 2.0 host | USB Host |
J16 | SD card interfact1 | SD card storage |
J17 | SD card interfact2 | SD card storage |
J18 | Ethernet interface | 10/100M self-adaptive network |
J19 | EBI bus interface | CPU internal bus |
J20 | Camera interface | COMS interface, used as video collection and GPIO |
J21 | Matrix keypad | 8 x 8 keypad interface, can used as GPIO |
J22 | SPI interface | SPI bus interface |
J23 | Standard JTAG interface | Simulation, debugging |
J24 | Power interface | +12V power supply, support +6 ~+25V wide range voltage |
K1 | Reset button | System reset |
K2 | Wake-up button | Sleep state activation |
S1 | Power swith | Power supply control |
Item | Content | Function |
---|---|---|
Cross-compiler | arm-2007q1-10-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2 | arm-linux-gcc 4.2 |
U-boot | Version: U-boot 1.3.4 | Provided with bootstrap, U-boot source code |
Support writing into DataFlash and NandFlash start | ||
Support SAM-BA software with usb writing and TFTP network update | ||
Linux Kernel | Version: 2.6.30 | |
RTC driver, save and restore system time after power off | Provided with test program and source code | |
SPI driver | Provided with test program and source code | |
EBI driver | Provided with test program and source code | |
I2C driver | Provided with test program and source code | |
Audio driver | Provided with test program and source code | |
LCD driver, supporting 320*240, 640*480, 800*480, 800*600, 1024*768 resolution | Provided special LCD with debug service | |
Touch screen driver, supporting 4-wire resistive screen | Provided with test program and source code | |
Serial driver | Provided with test program and source code | |
PWM driver | Provided with test program and source code | |
Buzzer driver | Provided with test program and source code | |
GPIO driver | Provided with test program and source code | |
8*8 matrix keypad driver | Provided with test program and source code | |
USB driver, support mouse, keypad, U disk, WiFi, bluetooth, printer, camera, barcode scanning, etc. | Support various USB external devices, provided with debug service | |
SD card driver | Support large capacity storage SD card | |
File System | Jffs2 file system | Provided with source code |
QT Routine | QT development environment | QT routine |
PC Development Environment | Provided with ubuntu 10.10 Linux OS, VMware 7.1.4 virtual machine and supporting development environment build manual | Convenient for user to next develop |
Bootloader | Support writing into DataFlash and NandFlash start | Optional |
Support user-defined boot logo | Up to 1024*768 resolution 24 bmp image | |
BSP Source Code | ||
BSP Open Source
| RTC diver, save and restore system time after power off; | Provided with test program and source code |
Registry saving,support saving registry information when electricity adjusted; | Convenient for user to debug | |
LCD driver, support 320*240, 640*480, 800*480, 800*600, 1024*768 resolution; | Provided special LCD with debug service | |
Touch screen driver, support 4-wire resistive screen; | Provided with test program and source code | |
SD card driver, support 2-line SD card; | Biggest support 4G | |
Audio driver, support audio input/output and MIC input; | Provided with test program and source code | |
Nic driver, 10/100M self-adaptive, can be expanded gigabit nic; | Provided with test program and source code | |
PWM driver | Provided with test program and source code | |
I2C driver | Provided with test program and source code | |
SPI driver | Provided with test program and source code | |
232, 485 serial driver test | Provided with test program and source code | |
Support 8*8 matrix keypad, also is GPIO | Provided with test program and source code | |
USB driver, support mouse, keypad, U disk, printer, WiFi, bluetooth, camera, barcode scanning, etc. | Support various USB external devices, provided with debug service | |
PC Development Environment | Provided with supporting VS.NET 2005 development tools, Wince 6.0 plug-in | Convenient for user to next develop |
Item | QY-9G45EK | ||
---|---|---|---|
Standard accessories | 1)12V/2A power supply (2)1-wire cross serial line (3) CD of DVD development (4)4-wire RS232 serial line (5)miniUSB cable (6)exquisite packing box | ||
DVD resources | Linux | Compilers | Cross-compiler arm-linux-gcc |
Tool software | Supporting terminal, writing, download tools | ||
Device manual | Main component's datasheet of back plane | ||
User manual | About all development and use | ||
Image file | Bootstarp, u-boot, kernal, image file of file system | ||
Test source code | Test routines and source codes of all interfaces | ||
System source code | Including bootstrap, u-boot, kernel, file system and QT source code | ||
Schematic | Back plane's schematic in PDF format | ||
Packaging library | Component packaging library of evaluation board | ||
Windows CE | Tool software | Supporting terminal, writing, download tools, sync software | |
Device manual | Main components' datasheet of back plane | ||
User manual | About all development and use | ||
Image file | Firstboot, Eboot, NK image file | ||
Test source code | Test routines and source codes of all interfaces | ||
BSP package | Related BSP board-level supporting package | ||
SDK | Related SDK | ||
Schematic | Back plane's schematic in PDF format | ||
Packaging library | Component packaging library of evaluation board | ||
LCD options(another pay) | 4.3' LCD module + 4-wire resistive touch screen + USB cable | ||
5.6' LCD module + 4-wire resistive touch screen + USB cable | |||
6.4' LCD+ 4-wire resistive touch screen + USB cable + inverter | |||
7' LCD module + 4-wire resistive touch screen + USB cable | |||
8' LCD module + 4-wire resistive touch screen + USB cable | |||
10.4' LCD+ 4-wire resistive touch screen + USB cable + inverter | |||
Module options(another pay) | TTL to LVDS module | ||
TTL to VGA module | |||
Sales hotline | +86-571-87858811, 87858822 |
[Notes]
Have an intention & interest in them. Join us.
Need Hardware Manual &More Information& Consultant ,please add my skype: xiejy_3 (24 hours online)
Why Qiyangtech?
1.Technical Support for lifetime.
2.Open Source.
3.Customisation Service.
4.Supply stably and chronically.
Wanna get a free Linux development board with wifi card size ARM board Linux discussion board hardware manual?
Wanna get an accurate price of Linux development board with wifi card size ARM board Linux discussion board?
Wanna get information of other products that are similar to Linux development board with wifi card size ARM board Linux discussion board?
Contact NOW!
Website: /en/
Janet