Product Details

bearing heating and dismount tools for outdiameter 480mm bearing

this is the technology data for the bearing heating machine working demands

it could be show the bearing heating machine suitable for the bearing inner diameters 20-120mm

this is the bearing heating machine for the bearing heating working demands it could be best design for those machine working

this is the bearing heating machine for the machine

Advantages of BHM Serious Induction Heaters:

Control Method and Display for Users
-Temperature Control
-Time Control
-Automatic Demagnetization
-Power Adjustment
-Show the heating temperature and heating the final target temperature actual value
-Display the current heating temperature and heating time remaining
-Prompt for the End of Heating
Compact Portable
-Vehicles Equipped with Devices Customize
Operate Easily
- Straightforward Control
-Facilitated rotating heating , a Solid Industrial Design

A Solid Industrial Design
-Heavy structure of the workshop by the stand the harsh environment
- Dust-proof, waterproof, anti-oil-function keyboard
Not detract from bearing
-Do not affect the bearing lubrication
-There are shock heating of the base to prevent vibration due to environmental reasons bearing on the marks left by David
Microelectronic Processor Control
-Designed to facilitate maintenance
-With self-diagnostic procedures
Laudable and environmentally friendly products
-Rapid heating, high efficiency and energy saving
-Clean: a smoke-free, non-steam, no waste disposal

THIS IS THE ADVATNGE FOR THE INDUCTION HEATING MACHINE WORKING DEMANDS

Power	0.5-1.0kw	Temperature control	0-180℃
Voltage	220V	Time control	0-99,59,,
Current	2.3-4.5A	Continuous installation	Yes
adapt bearing inner diameter	20-120mm	Maintain temperature	Yes
largest bearing outside diameter	260mm	Automatic demagnetization	Yes
largest bearing width	120mm	Self-adjusting power	Yes
Largest bearing weight (kg )	15	Control panel (display)	Digital Display
Other parts (kg )	10	Forced air-cooled design	Yes
The host weight	3kg	Dimensions(cm)	402130
Frequency	50Hz	Overheatingprotection	Yes

this is the bearing heating use , it could be best suitable for the bear heating working demands

1, Connect the power (220V/380V) and instrument lights on.
2, Instructions in accordance with the instrument temperature, press“∧”or“∨”Set the heating to the desired temperature,Then Press"START"to Start,press"STOP"to stop.
3, Indicated by the instrument time,press “∧”or“∨”Set the heating time required,press the "START", and start the heating. Press the "STOP" to stop.
4, According to the work piece diameter select heating yoke, the work piece is heated sleeve on the yoke (or set the pole), the yoke on the transformer two pillars end face and pressed activities of yoke. (Note: in the column end face of the to wipe butter.)
5, Sensor sucked into the work piece, press the "START", and start the heating. Press the "STOP" to stop.
6, When the set heating temperature (time) reaches the set value, the machine automatically stops working.
7, Remove the work piece after the end of the installation.

this is the advantege for the bearing heating machine working demands it could be best suitable for the induction heating machine working demands use

this is the shipping and express for the bearing heating working