60-160L blow molding machine, buy ABS car spoiler manufacture machine, blow moulding machine car spoilers on China Suppliers Mobile

Product Details

The car spoiler manufacture machine is used to make abs car hollow products , A wide variety of materials can be used for the machine, which are suitable for producing 10-30L PE bottle. Extrusion system using a hard gear reducer and inverter. The die head system adopts central-incoming extrusion die made of special steel, imported hydraulic valve and seal parts with proportional control valve. The control system consists of PLC and Human-machine interface imported from Japan, an automatic temperature control module and imported electrical parts.

1. The screw adopts high potency melt to make sure the material well mixed.

2. Adopt frequency control of motor system to reduce the power consumption.

3. Adopt horizontal movement frame to improve stability and speed.

4. The oil cylinder is in the center of the moldboard, uniform stress for quality products and increase life span.

5. High stench guild rod controller the mold open and clamp, to enhance the steadily and high efficiency.

6. The extrusion head use spreader or screw type to well mixed the thickness and easy to change different color.

7.Advanced design to eliminate the melt material degrade in the runner, to avoid the perform draw-down and the welding line.

8. The precise time control system assured good quality, suitable weight and reduces production cycle.

9. Freely to move the extrusion foundation backward or forward to make the exchange of the mold easy.

10. Multi-function bottom blowing type for shaped products.

11. The mechanical arm can take out the product automatically.

Plastic car spoiler manufacture machine parameter

Item	Code item	Parameter	Note
Extruder (Main extruder )	Max capacity	160L
	Main screw	Ø100mm	High efficiency mixing
	Screw L/D	25-30
	Screw material		38CrMoALA
	Max.Extruder consumption	180-250KG/hr
	Twisting transition method	Electrical machinery,Gear box,AC motor	Hard gear surface decelerator with AC regulator
	Driving motor	55KW
	Screw rotate speed	5-60r/min
	Ahead/back adjusting	Yes
	Up/ down adjusting	Yes
	Temperature control zone	5
	Heating power	22kw
	Cooling for blower	5
	Cooling function	Yes	Cooling water
Clamping unit (Mold openiing/closing unit)	Structure		With three bar timing clamping structure in high speed and high force,to achieve quality products
	Clamping directions	Linear guide	For high precise location for longer service life
	Platen dimension	1100*1100mm	(W*H)
	Max.mold dimension	900*1400mm	(W*H)
	Platen distance	600-1400mm	Min.-Max.
	Clamping force	360-560KN
	Mold thickness stroke	610-750mm
	Fixing pattern of mold	Mold press platen
	Mold open/close stroke control	Inducing Switch +moving	Discriminate mold opening/closing end,mold opening/closing slow speed
	Light Electric Safety protect		Taiwan
Die head	Form	Accumulator	First in ,First out
	Material		38CrMoALA,inner mirror treatment
	Accumulator volume	18L
	Output of injecting	13kg	HDPE,5502
	Max die-pin diameter	450-510mm
	Heating Method		Stainless steel heating ring,precision +1%
	Temperature control zone	5
	Blow-air	Yes
	Adjusting of parison thickness	Yes	MOOG 100 point
	Adjusting method of thickness	Inner mold adjusting+5mm

Product which made by this car spoiler manufacture machine

Plastic car spoiler making machine die head

Plastic car spoiler moulding machine clamping system

Plastic car spoiler moulding machine screw

car bumper blower electric parts

Plastic car spoiler making machine spare parts.

Plastic car spoiler moulding machine component brand

Any inuqiry about car bumper blower , blow molding machine for car spoiler, extrusion blowing machine for ABS car spoiler , please contact us! Thanks!