Specifications

Have high strength, acid and alkali, corrosion-resistant bacteria, good heat resistance, non-polar surfaces,

ultra filtration | micro filtration for replacement water filter 

 

Excellent Water Quality:

The aperture size of UF membrane is less than 0.01micron (10nm), can remove the bacteria, virus, colloid, rust and other impurities which produced by the secondary pollution in municipal tap water supply; And keep the helpful mineral matters and trace elements for human body. The purified water's microorganism and turbidity value can match drinkable water standard.

 

 

 

DESIGN CRITERIA

 

- Average flow: 77 I/m2/h-br 
- Recovery 92% - 94% 
- Cloudiness < 5 NTU 
- pH: 7 
- DOC < 2 
- SS < 10 mg/l 
- Fe < 5 ppm 
- KOI < 50 
- BOI < 15

 

 

 

ADVANTAGES

 

- Low energy cost 
- Treatment at the level of 0.1 - 0.01 micron 
- Operable without requiring operator 
- Visual monitoring facility with automation 
- Automation alarms 
- System status indicators on the automation panel

 

 

 

Maintenance methods
1. Raw water use fungicides to kill bacteria and microorganisms. Maintain proper chlorine residual;
2. Pre-filter to remove solid particles suspended body, at high colloid content, using flocculation pretreatment;
3. Timing backwash quick wash, rinse regularly chemistry;
4. Dynamic filtration, emission concentrated water, recycling ratio depending on the raw water quality may be;
5. Slow-down, to prevent shocks.

 

Applications 

1. Recycle of industrial wastewater (papermaking wastewater, printing anddying wastewater, petrochemical wastewater, steel and iron wastewater, chemical industry wastewater); 
2. Pretreatment for NF and RO in landfill leachate treatment; 
3. Electrophoretic paint treatment; Liquid concentration, separation, clarification and filtration