Main T and Cross T Forming Machine

Support you money !! Support you service !! Support you technology !!

PLC control system !! Hydraulic cutting system !! Mult-language conversion system !!

Main T and Cross T Forming Machine   is a strip of raw materials, through continuous cold rolling molding, production of complex cross-section profiles, which consists of decoiler, guide rack, forming hosts, calibration device, cut-off part, receiving station , composed of electrical control and so on. It is easy to use, easy to operate and so on.

Main T and Cross T Forming Machine    Material 
Processing material: colored steel plate, galvanized plate, or aluminum plate

Material thickness: 0.4-0.8mm 
Material hardness: 550 mpa---350 mpa 
Formed width: 100mm
Forming speed: 20m/min 
Main T and Cross T Forming Machine   Technological process 
Uncoiler-feeding system-roll forming machine-cutting system-table

Main T and Cross T Forming Machine   Uncoiler system 
Usage:It is used to support the steel coil and uncoil it in a turnable way. 
Passive uncoil pulled by roll forming system 
Loading capacity:1500kg 
Uncoiling width:300mm 
Inner diameter: 450-550 mm

Main T and Cross T Forming Machine    Entry Beach 
Usage:Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron. 
Main T and Cross T Forming Machine     Main Roll Forming System 
Feature : Ensure stability , precision and lifetime. 
Usage: In order to keep the product shape and precision, adopts welded sheet structure, motor reducer drive, chain transmission ,roller was chromed which can keep the molding plate surface smooth and not easy to be marked when it is being stamped. 
Length of the main part: about 3300 *1500 *1200 
Weight of main part: 3000kg 
Voltage : 380 V/50HZ 3Phase or as your required 
Roller fixer : middle plate
Frame : 450 H steel welded 
Drive mode: gear 
Frame thickness:30mm
Material of rollers:GCr12MoV, surface hard chromium plating. 
Material of shafts: 45# steel with tempering
Diameter of shafts: φ 40mm 
Number of rollers : 14 rollers 
Main power: 3 kw

Main T and Cross T Forming Machine   Shearing Mechanism 
Feature : Ensure stability, precision and cutting speed 
Function : Automatic cutting controlled by PLC 
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products. 
Material of blades: Cr12 quenched 
Power supply : hydraulic power 
Components:It contains one set of blade , one hydraulic tank and one cutter machine.

Main T and Cross T Forming Machine    Hydraulic Station 
It is controlled by gear pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job. 
Power: 5.5 kw 
Hydraulic oil: 46 #

Main T and Cross T Forming Machine    Electric Control System 
1. Adopted PLC , frequency converter , Delta touch screen from Taiwan to ensure high speed with stability, precision and lifetime. 
2. Other electric element are Panasonic

.

Main T and Cross T Forming Machine     Our Service:

1. Installation and training of machine manufacturer:
a. If buyers visit our factory and check the machine, we will teach you how to install and use the roll forming machine for sale , and also train your workers/technician face to face.
b. Without visiting, we will send you user manual and video to teach you to install and operate.
c. If buyer needs our technician to go to your local factory, please arrange board and lodging and other necessary things.
2. After Service of roll forming machine for sale:
a. One year guarantee for whole roll forming machine for sale.
b. 24 hours technical support by email or calling:
c. If there is any problem found of steel roof sheet roll forming machinery, we will repair roll forming machine for sale for free in one year.

Main T and Cross T Forming Machine     Company Information:

Cangzhou Zhongtuo International Trade Co., Ltd is a professional manufacturer and exporterwhich has its own factory and also cooperate with several production factories and associated nterprises, concerning with the design,development and production of cold roll forming machines,material of building. It is located in northwest of CangZhou, as a long history of cold roll formingmachine production base. All products comply with international quality standards and are greatly appreciated in variety of different markets throughout the world, such as Asia, Africa, Europe,South America, and Australia and so on.

Main T and Cross T Forming Machine     FAQ:

1. Does one machine can only produce one style panel profile?

Not exactly.For wider and double layer making machine. It can produce more than 6 kinds of panels.

2. Do you have after sales support?

Yes, we are happy to give advice and we also have skilled technicians available across the world.We need your machines running in order to keep your business running.

3. How to visit your company?

a.Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi (1 hour), then we can pick up you.

b.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick up you.

4. What can you do if the machine broken?

Our machine's warranty period is 12months,if the broken parts can't repair,we can send the new pars replace the broken parts freell,but you need pay the express cost yourself.if after warranty period,we can through negotiationfor to solve the problems,and we supply the technical support for the whole life of the equipment.

5. Can you be responsible for transport?

Yes, please tell me the destination port or address.we have rich experience in transport.

6. You are trade company or factory?

We are trade company but we also have own factories. Building trade company is just for exporting various types of cold roll forming machines.

7. Why your price is higher than others?

As we persist on that each factory should put quality at the first place. We spend time and money on developing how to make machines much more automatic, accurate and high quality. We can make sure that our machine could use more than 20 years without any problem. We can provide 2 years free qualityassurance.

8. How long the machine could be made?

Normally speaking, welded pipe making machine could be made without 45 working days. If you need machines in a hurry, we can make it for you less than a month.