R-8 Butyl Hot Melt Sealant               

1. R-8 is a hot melt sealant made by vistanex, which as the first hot melt sealant for insulating glass. The product of single component, without flux, and can keep plastic and sticky in a wider temperature range

2. It has good adhesion for materials such as glass, aluminum alloy, galvanized steel, stainless steel.

3. It is easy for construction, and has a long lasting sealing. The color is bright. The product has excellent resistance to ultraviolet ray light aging, low water vapor transmittance and good bonding strength of glass and steel metal, etc.

Application:
1. R-8 used for inside seal of hollow glass, it need be used with the ZT-8800 silicone sealant which is also produce by our factory in order to achieve the seal of double side.

2. R-8 has a lower water vapor transmittance and better aging resistance, which provide effective guarantee for producing high quality hollow glass.

3. R-8 has higher cohesive strength, especially suitable for large plate hollowglass production.

Directions for use:
1. Article interval or grease, dust and other dirt on the glass, can reduce the sealing and bonding effect of all sealant, must be removed before use.

2. R-8 can use hot melt butyl extruder and also automatic gluing machine coating. The Construction environment temperature requires not less than 10 ℃.

3. Extrusion temperature is 110 ~ 130 ℃, glue mouth temperature should be higher than the plastic cylinder temperature, about 1 ~ 2 ℃. Please note: specific temperature is closely related to the heating efficiency of machines and the factors such as the accuracy that the temperature measurement shows.

4. The user can adjust the temperature and the glue pressure according to the making conditions and the requirements of make hollow glass, to achieve the best effect of coating. We do not recommend use the pressure glue pump, because its pressure is low and difficult to adjust, is not conducive to operation.

The main technical parameters:
Color: black  

Proportion: 1.14 ~ 0.05 g/cm³
Solid content: 100%  

Shear strength: 0.13Mpa
Water vapor transmittance: 0.90 g / square meter
Heat weightlessness: 0.1%
Ultraviolet light resistance: according to standard GB/T 11944-11944, test qualified.
Product standards:
JC/T 914-2003 standard requirement
Packaging, storage and transportation:
Packing: paper barrel
Storage conditions: - 10 ℃ ~ 35 ℃ dry ventilated place

Storage period: 24 months.

R-8 sealant is a non-dangerous goods, it can be transported by trains, cars, ships and planes.