Product Details

Continuous belt type dryer machine for charcoal briquettes

Introduction of continuous belt type dryer machine:

Continuous belt type dryer machine is a kind of batch, continuous production of drying equipment, mainly heating mode have electric heating, steam heating and hot air heating taking advantage of steel mesh as transmission band to carry materials for continuous drying. Directly deliver the suppressed finished product ball to table conveyor through conveyor, evenly distribute the finished product ball in dryer through scraper blade located in the upper point of table conveyor in order to increase air permeability of ball and achieve drying.

Application of continuous belt type dryer machine :

The continuous belt type dryer machine is an high performance continuous drying equipment.

It is widely used for chemical industry, foodstuff industry, pharmaceutical industry, construction materials industry, electronic industry and so on. Especially it is suitable for drying raw materials that are good in breathability and have the shape of pieces or strip of granule.

It is also possible to dry the pasted raw materials such as filter cake after shaped through granulator or extruder.

Working principle for continuous belt type dryer machine
:

* Materials are uniformly put on the mesh belt dryer machine by the feeder. The mesh-belt uses generally 12-60 mesh stainless steel wire net and it is drawn and moved inside the drier by a transmission device.

* The conveyor dryer making machine is composed of several units. For each unit, the hot air is circulated separately. Some exhausted gas is discharged with a special moisture elimination blower.

* The waste gas is controlled through an adjustment valve. The hot air passes through the mesh-belt covered with the material from the top to the bottom or from the bottom to the top and this will complete the heat and mass transfer process.

* This process will bring the material water away. The mesh-belt moves slowly, Running speed can be freely adjusted according to the material temperature.

* The final products after conveyor dryer making machine will fall into the material collector continuously. The top and low circulation units can be freely equipped according to the users’ demand. The unit number can be selected according to the demand.

Technical parameters of continuous belt type dryer machine :

Model	KHWD6	KHWD8	KHWD10	KHWD12	KHJWD16	KHWD20	KHWD24	KHWD30
Width of mesh belt(mm)	600	800	1000	1200	1600	2000	2400	3000
Length of drying section(m)	6-12	6-12	6-16	8-16	8-22	10-26	12-30	12-40
Length of feeding section(m)	1	1	1	1	1	1.5	1.5	2
Length of transmitting section(m)	1	1	1	1	1	1.5	1.5	2
Drying area(m²)	3.6-36	4.8-48	6-80	7.2-96	12.8-105.6	20-260	28.8-360	36-600
Layers NO.	1-5
Interlamellar spacing (mm)	400-600
Carrying capacity	90-200 Kg/m²
Operation temperature (°C)	carbon steel≤400 C°,stainless steel≤600 C°
Drying strength((kgH₂O/h)	5-20kg H₂O/m².h
Heat source	hot wind,electricity,steam
Running speed	0.06-1m/min
Transmission powder(kw)	1.1-2.2	1.1-2.2	1.1-2.2	1.1-3	1.5-3	1.5-4	3-7.5	5-11
Matching equipment	conveying equipment,air heating furnace,dust removing equipment,draught fan etc

Pictures for continuous belt type dryer machine :

The mesh belt on the dryer

Customer visiting continuous belt type dryer machine

1.What kind of material can be dried by the continuous belt type dryer machine?

Answer: Nearly all kinds of lump and chips material can be dried by our machine such as wood chips, leaves, coal briquettes, charcoal briquettes, iron pellets, etc.

2.What kind of fuel can be used with the mesh belt dryer?