XY-K series corrugated carton box flexo multi-color printing slotting die cutting machine
USD $40,000 - $100,000 /Set
Min.Order:1 Set
Dongguang Canghai Packing Machine Co., Ltd.
1. The whole machine is controlled by servo driven program or mechanical in computer.
2. All the position adjustment are charged by PLC, the coder follows.
3. Each unit has equipped touch-screen to make adjustment accuracy, which is convenient to operate.
4. The remote tele-maintenance service is available.
1. Adopt the good material and parts
2. The transmission gear adopt 20rMinti high quality alloy steel which is grinded after heat-treatment hardness 60 degree
3. All roller plated with rigid chrome, increase hardness.
4. Whole machine main structure part using capt-lock union link, eliminated the link interval, suit to the long time printing.
5. Touch screen, plc control, frequency conversion adopt famous brand.
Main specifications:
Max machine speed (piece/min) | 180 |
Max feeding size(mm) | 2200*3600 |
Min feeding size (mm) | 550*600 |
Skip feed paper (mm) | 2200*3700 |
Max printing depth (mm) | 3,5,7 |
Max printing area (mm) | 2100*3500 |
Standard printing depth (mm) | 7.2 |
Registration precision (mm) | <±0.5 |
Slotter precision (mm) | <±1.5 |
Die cut precision | <±1 |
1. Taking lead edge feeding technology to ensure feeding precision , fast and it is suitable for all kinds of corrugated cardboard.
2. Using dual rubber roller driven by servo-motor to delivery without mechanical difference.
3. With air-operator adjustment function, the top feeding cylinder coated abrasion proof rubber to keep the cardboard from distortion.
4. Vacuum suction lead Gage feed and adjust the paper size as per pressure of wind.
5. Installing suck removing dust machine to eliminate the odd on the printing plate and improve the printing quality.
6. Adjust the feed unit space by manual.
Printing Unit:
1. Both printing cylinder and impression cylinder are made of high quality steel with grounding surface and chrome plated.
2. Dynamic and static balance correction ensure to run stability.
3. Adopt hanging structure, convenience and fast to set up.
4. Installing and un-stalling printing plate with pedal switch.
5. Working with feeding unit and automatical devore system(during the feeding unit runs, the anvil roller goes down to contact with printing plate, while, on contract, leave printing plate.)
6. Printing roller keep the function of zero return and can reset in dynamic and static condition.
7. Printing phase adopt plc touch screen 360 degree adjust electric number.
Slotter unit
1. The slot knife thickness 7 millimeter manufactured by high quality alloy, tooth profile cutting sharp, the abration resistance high.
2. The slot knife phasing organization, the overtone structure, the frequency changer controls the brake, static 360 degrees adjustments.
3. The slot knife apron derailing uses the electrically operated control, the adjustment is quick and ac-curated.
4. Regards the user to need to be possible to match the punch insistence.
5. Slot department canada supposes the pro-compression to roll around, sharpens the cardboard resistance to compression ability.
6. The line ball cuts the angle turn place addition compressing wheel disk, guaranteed the mouth paper box sticks the place to compress.
Die cutter unit
1. Die cutter unit roller adopt high quality steel, plated with rigid chrome.
2. High precision dynamic balance, increase machine running stable.
3. Mold roller and glue roller can auto separate by cylinder bias unit when the machine don’t die cut this can lighten machine load and increase glue and knife life.
4. Auto up and down unit base feeding system, the mold roller will up when feeding paper. The mold roller will down when stop feeding paper. Assure every paper die cut correctly.
5. The glue roller is mechanical transmission. The roller move 40mm left and right. The glue roller wear and tear regular could increase the life of glue roller.
6. Die cut phase adopt plc touch screen, 360 degree adjust electric number.
7. Machine have glue amend unit, the glue roller can use after many times amend.
Stacker unit
1. Connection arm operation with manually or automatically.
2. The driving belt of connection arm can adjust the elasticity alone and can choose the number of connection arm at will.
3. Platform elevator is case of strong thread.
4. Height up to 1600 mm
5. Platform elevator with brake control device to keep stable position anti-slipping
6. A pneumatic controlled-plate will be pop-up to hold the coming substrate, when a pre-setting height reaches.
7. Back end plate position hand regulation.
8. The plane wrinkle leather belt, prevented the cardboard glides down.