AISI 1045,4140,5140 steel plate, structural steel used for hydraulic gear pump
USD $732 - $805 /Ton
Min.Order:1 Ton
Dongguan City Yaoteng Special Steel Co., Ltd.
AISI 1045,4140,5140 steel plate, steel series used for hydraulic gear pump
1.Comparative Standards
GB, AISI, ASTM, ASME, EN, BS, DIN, JIS
2.chemical composition(%)
C | Si | Mn | P | S | Cr | W | Mo | V | Co | |
1045 | 0.50 | 0.25 | 0.80 | 0.030 max | 0.030 max | 0.02 | - | - | - | - |
4140 | 0.42 | 0.30 | 0.60 | 0.025 max | 0.025 max | 1.00 | 0.25 max | 0.20 | - | - |
5140 | 0.40 | 0.30 | 0.70 | 0.025 max | 0.025 max | 1.00 | 0.25 max | - | - | - |
3.Specification of 1045/ 4140/5140 steel
technology | thickness/Diameter | width | length | |
steel round bar | forged,hot rolled,cold drawn,cold rolled | 50-200 | 2000-58000 | |
steel plate | forged,hot rolled,cold rolled | 20-200 | 100-2000 | 2000-58000 |
4. Heat treatment
Normalized / Annealed / Quenched +Tempered
5. Hardening
Harden from a temperature of 840-880oC followed by oil, air ot warm bath (180-220oC) quenching. Hardness after quenching is 52 HRC.
6.Physical properties
Modulus of elasticity [103 x N/mm2]: 205
Density [g/cm3]: 7.85
Thermal conductivity [W/m.K]: 29.0
Specific heat capacity[J/g.K]: 0.46
7.Application
1045 | Be widely used for machine parts |
4140 | Be used for main shaft of steamer,bolt for 400 ℃, wiper hammer ,herringbone gears of rolling mill |
5140 | Be used for shaft,screw bolt,joint shaft in widely use |
8.payment
30% advance by TT; Balance pay before the shipment against shipping documents or irrevocable L/C at sight
9.Delivery Time
10-45 days.
10.steel product details
11.steel producting process and quality guarantee
Packaging Detail:seaworthy packing or as customer's requirement
Delivery Detail: 15DAYS
1.sample free and 24 hours online
2.delivery on time
3.large stock
About Dongguan Yaoteng Trade Company:
other stock steel for promotion:
Hot work tool steel | AISI H10, H10A, H11, H12, H13, H21, L6, etc. |
DIN 1.2343, 1.2344, 1.2365, 1.2367, 1.2581, 1.2714, 1.2885, etc. | |
JIS SKD5, SKD6, SKD61, SKT4, etc. | |
Cold work tool steelplastic mould steel | AISI D2,D3,D5,D6,D8,A2,O2,O1 etc. |
DIN 1.2601,1.2379,1.2080,1.2363,1.2842,1.2419,1.2510,1.2550,1.2767 etc. | |
JIS SKD1,SKD11, SKS3 etc. | |
Alloy structural steel | AISI 4140,4340,5140,4130 etc. |
DIN 1.7225,1.6511,1.7035,1.7220 | |
JIS SCM440 | |
Plastic mould steel | AISI P20, P20+Ni, 420 etc. |
DIN 1.2083,1.2311, 1.2316,1.2738 etc. | |
JIS NAK80 | |
High speed steel | AISI T1,M2,M35,M42 |
DIN 1.3355,1.3343 | |
JIS SKH2,SKH51 |
Product show
CNC machining Center and Warehouse District
Contact us
Thanks for visit our website, any question contact us!