HR Alloy Steel Round Bar 4140/4140 Alloy Steel/SAE 4140 Steel Price
USD $100 - $2,600 /Ton
Min.Order:1 Ton
Dongguan City Yaoteng Special Steel Co., Ltd.
HR Alloy Steel Round Bar 4140/4140 Alloy Steel/SAE 4140 Steel Price | |||||||||||||
1.Specification of 4140 alloy steel | |||||||||||||
Round bar | Hot rolled | Forged |
| ||||||||||
Diameter(mm) :14~200 Length (mm): 2000~6000 | Diameter(mm) :210~800 Length (mm): 2000~6000 | ||||||||||||
Plate | Thickness(mm) | Width (mm) | Length (mm) | ||||||||||
14-500 | 200-2300 | 2000-6000 | |||||||||||
The specification can be customised! | |||||||||||||
2.Chemical compositon of 4140 alloy steel | |||||||||||||
NO. | C | Mn | Si | Cr | Mo | Ni | P | S | |||||
Aisi 4140 | 0.33~0.38 | 0.75~1.00 | 0.15~0.35 | 0.80~1.10 | 0.15~0.25 | - | ≤0.035 | ≤0.040 | |||||
3. Mechanical properties of 4140 alloy steel | |||||||||||||
Tensile str. (N/mm2) | Yield point (N/mm2)
| Elongation (%) | Hardness | ||||||||||
980 | 835 | 12 | 269 | ||||||||||
4.Heat treatment of 4140 alloy steel | |||||||||||||
1. Forging:Heat slowly and uniformly to 1000°C. After forging cool slowly. | |||||||||||||
2. Annealing: 780-800`C slow cooling | |||||||||||||
3. Annealed Hardness:200-230HB | |||||||||||||
4.Oil Hardening:840-860 Tempering:470-560 | |||||||||||||
5. HRC Secondar Hardness:41-52 | |||||||||||||
5.Characteristic of 4140 alloy steel | |||||||||||||
1.High strength and toughness ! | |||||||||||||
2.Good hardenability and the quenching deformation is small! | |||||||||||||
3.Good processability and easy polishing. | |||||||||||||
4.Easy texture and platable. | |||||||||||||
5.The strength and section are bigger than 35CrMo(4135). | |||||||||||||
6.Application of 4140 alloy steel | |||||||||||||
1.Suitable for unibody electrical and electronic mold. |
2.For plastic mould and die holders. |
3.For making main shaft of streamer, bolt for 400°C. |
4.For making the hammer stem and aggravating drill pipe. |
Main product | Hot work tool steel |
DIN | 1.2344,1.2343,1.2365,1.2581,1.2367,1.2713 etc. |
AISI | H13,H11,H10,H21, etc. |
JIS | SKD61,SKD6,SKD5,SKT4 etc. |
Cold work tool steel | |
DIN | 1.2601,1.2379,1.2080,1.2363,1.2842,1.2419,1.2510,1.2550,1.2767 etc. |
AISI | D2,D3,D5,D6,D8,A2,O2,O1 etc. |
JIS | SKD1,SKD11, SKS3 etc. |
Plastic mould steel | |
DIN | 1.2083,1.2311, 1.2316,1.2738 etc. |
AISI | P20, P20+Ni, 420 etc. |
JIS | NAK80 |
High speed tool steel | |
DIN | 1.3355,1.3343 |
AISI | T1,M2,M35,M42 |
JIS | SKH2,SKH51 |
Structural alloy steel | |
DIN | 1.7225,1.6511,1.7035,1.7220 |
AISI | 4,140,434,051,404,130 |
JIS | SCM440 |
Product show
surface treatment
Production Flow Chart
Certificates
If you have any interest, please feel free to contact us.