Specifications

1.The sleeving is not sticky
2.no any clearly sign of discolouration

VG 202 FIBERGLASS SLEEVING FOR CARBON BRUSH

 

 

Description

The fiberglass sleeving for carbon brush is a alkali-free fiberglass braided

sleeving coated with acrylic resin. It Possesses excellent flexibility an smooth

cut. It can be used as a cover for the pigtail of a carbon brush.

Length:1000+20(-10)mm.

 

Appearance

The sleeving is not sticky. There are no lines and blots on the surface

but small pellets may appear due to glass thread sleeving. It’s colour is

black or dark and no any clearly sign of discolouration.

 

Heat resistance

When it cools down after being kept in a box with a constant temperature

of 130±2’for 24 hours and is wound around the specific mandrel.

It’s coating will not crack.

 

Twist resistance

When the sleeving is cut and the new end is twisted ten times by

fingers, the crosscut will not get loose by two inter-sections of braid.

Compatibility of wire’s colour: The colour of the wire inserted

inside the sleeving should be compatible with the colour it was uninserted.

 

Inner Diameter		Wall Thickness
Nominal	Tolerance	Nominal	Tolerance
1;1.5	0.2	0.3	±0.10
	-0.1
2;2.5	0.3	0.3	±0.10
	-0.1
3;3.5	0.3	0.5	±0.15
	-0.1
4;5;6	0.4	0.5	±0.15
	-0.2
7;8;9	0.5	0.6	±0.15
	-0.3