Specifications

1)Video bandwidth 8 MHz
2)1 channel Video + 1 channel reverse data
3)audio,video,telephone,ethernet optional

 3ONEDATA 1-Channel Video CCTV Fiber Optic Transceiver(SWV60101)  

 

Introduction:

3onedata fiber-optic video transceivers SWV60100 series can simultaneously transmit 1 channel of 8-bit digitally encoded broadcast quality video/return or bidirectional data/unidirectional or bidirectional audio/Ethernet/Telephone/Dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for different working environment.

 

Features:
1.8-bit digitally encoded and non-compression broadcast quality video transmission
2.Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols
3.Support any high-resolution video signal 
4.Automatic compatible PAL, NTSC and SECAM video system
5.Power supply and other parameter state indication, which can monitor the operation condition of system
6.Support no-damage regenerative trunk of video
7.Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required .
8.Special ASIC design .
9.Industry-grade of operating temperature from -10°C to 65°C , which is
10.applied to the different working environment
11.Hot-swap function

Technical Specification

Video channels:1 channel

Video bandwidth:8 MHz

Automatic compatible video system:PAL, NTSC, SECAM

Video input/output impedance:75 Ω(unbalance)

Video signal-to-noise ratio:≥67dB

Differential gain:(10%-90%APL) DG <1% ( typical value)

Differential phase(10%-90%APL) DP <0.7° ( typical value)

Video connector:BNC

Fiber-optic Specification

F/O connector: FC/ST/SC

TX :Power:-15 ~ -8dBm   Sensitivity: ≤-35dBm

RX:Power:-15 ~ -8dBm   Sensitivity :≤-35dBm

Transmission Distance :20KM (single mode)

Operating Wavelength:TX1310/RX1550nm (Transmitter); TX1550/RX1310nm (Receiver)

Specification of custom-made options

1. Data

Connector:Terminal Blocks

Encoded type :RS485 / RS422 / RS232 / Manchester

Data rate :0 - 400Kbps

BER :≤10^-9

2. Audio

Connector:Terminal Blocks

Audio input / output :impedance 600Ω(Balance/ unbalance)

Audio input / output voltage: 2Vp-p ( typical value)

Audio input / output level :0dBm ( typical value)

Video bandwidth:10HZ~12KHZ

Audio digital encoded bandwidth: 24bit

Audio signal-to-noise ratio: S/N≥95dB  (weighted)

3. Telephone

Connector: RJ11

Bandwidth: 8KHZ

Features:Support call-showing function ;support H-F

Operating mode: Point to point hotline mode / FXS-FXO

4. Ethernet

Connector:RJ45

Support mode : Half duplex or Full duplex

Standards:IEEE802.3

Data rate:  10M / 100Mbps

Bandwidth: 25M

Characteristic

Dimensions: 11.1(L)×10.7(W)×2.8(H) cm 

Operating Voltage: DC5V (we will offer external power supply from AC96-240V to DC5V for each unit )

Operating Temperature: -10°C to +65°C

Storing Temperature: -45°C to +85°C

Humidity: 0 to 95% non-condensing

MTBF: ≥ 10⁵ hours

Warranty 5 years

ApprovalsFCC,CE, RoHS approvals