E1 to Fiber Optic Modem
USD $1 - $100 /Piece
Min.Order:1 Piece
Shenzhen 3onedata Technology Co., Ltd.
Support optic fiber loop and E1 port loop
Choice ST/FC/SC connector
220VAC or -48VDC power input
Working temperature -25~70
E1 to Optical Fiber Protocol Converter
Features |
1) Lucency transfer E1(G.703) protocol;
|
2) Support optic fiber loop and E1 port loop;
|
3) Choice ST, FC, SC connector;
|
4) E1 (G.703 ) interface support 120ohm (RJ-45) and 75ohm (BNC);
|
5) Multi-mode 2KM, signal-mode 20-100KM.
|
Introduction |
MODEL7301 Optical Optic Modem converts E1 electrical signal into optical data stream for transport over single mode or multimode fiber optic cables. At the opposite end of the fiber, the optical stream is converted back into electrical signals of the appropriate interface such as G.703 & V.35. This fiber optic modem extends the transmission distance up to more than 100Km. The frame format of MOD-E1 is unframed for E1, so it can be used to transmit E1 signal of unframed video.
|
Specification |
Optic Interface |
Line mode type CMI
|
Line mode rate 8.192Mbps
|
Operating wavelength 850nm,1310nm or 1550nm
|
Optic fiber connector multi-mode adopt ST connector single-mode adopt FC/SC connector
|
Transmission distance Single-mode: 20,40,60,80,100,120km Multi-mode: 2km
|
E1 Interface |
Standard ITU-T G.703 G.704
|
Data rate 2.048Mbps
|
Working Asynchronism Transparent transfer
|
Operating mode HDB3
|
Impedance 75Ω, physical interface BNC; 120Ω, physical interface RJ45
|
Protection 1500V electronagnetism isolate
|
Environment, Power and Dimension |
Working temperature -25 to 70°C
|
Storage temperature -40 to 85°C
|
Humidity Relative humidity 5% to 90%(free of condensate)
|
Input power 220VAC or -48VDC
|
Consumption 2W
|
L×W×H 227.4mm×146.3mm×42.6mm
|
Rack-mountable 19in 4U standard casing
|
Warranty time 5 years
|
Certification CE,FCC, RoHS
|
Packing List |
1) 3onedata Protocol Converter Model7301×1 2) Power line(E1 Optic Fiber Modem/AC) ×1 3) User manual×1
|