Horizontal Single Drum  Silica Sand Rotary Dryer  

1. Brief introduction of rotary dryer :

Silica sand  Rotary dryer is widely used for drying slag limestone, coal powder, slag, clay, etc. Dryer can also be used in building materials, metallurgy, chemical and cement industry. Rotary Dryer mainly consists of dryer body, raw material feeding plate, driving and supporting device, seal ring, etc. Dryer can be generally divided into four types, they are: rotary dryer, triple-drum dryer, indirect heat transfer dryer, vertical dryer. Different kind of dryer has its own characters and advantages, the specific choice of a special dryer depends on different elements.

2. Rotary dryer Working Principle:

1. Materials are sent to hopper of rotary dryer by belt conveyor or bucket elevator.

2. Materials enter the barrel installed with slope to horizontal line from the higher side, and hot air enters the barrel from the lower side, and then materials and hot air mix together.

3. Materials go to the lower side by gravity when the barrel is rotating.

4. Lifters on the inner side of barrel lift materials up and down in order to make materials and hot air mix completely, which is designed to improve the producing efficiency of rotary dryer.

See the rotary dryer flowsheet to understand the rotary dryer working principle:

3. Rotary Dryer Technical Parameters:

4. Rotary Dryer Features:

1. Our silica sand rotary dryer adopts new Spreading plate device, which has guidance, flow, material functions

2. It can make the material content in the dryer radial cross section to full uniform, material will become thin and all.

3. The state of the heat flow entirely, to achieve the purpose of make full use of the heat.

4. Our dryer choose reasonable operating parameters, coal consumption and power consumption of general baked dry machine more than 10-15%, one machine yields above 10-15%.

5. It has been widely used in the cement and mineral processing enterprise.

5. Our Factory Rotary Dryer and delivery :

6.HengXing Rotary Dryer Installation Site: 

Our company has realized the computer informationization of management, production, and the CAD and CAPP of production research and process design. We have 29800 square meters of total factory area. We have established strict quality control system to make sure each manufacture step is perfect.

We have passed some international certifications such as ISO, SGS, GMP,CE etc. You can rest assured aboutour machinery.

With advanced CAD&CAPP technology we have built long coorperate relationships with world customers such as America, Cannada, Poland, India, Russia, Australia, Brazil, South Africa, Mongolia, etc. Our products have been exported to 98 countries.

You are welcome to visit our factory to see our rotayr d dryer at any time!! 

Contact:
Ms Sara Pang
Mobile phone : (whatsapp number): 0086137 8347 1727
Skype: sarapang6
Wechat: sarapang6