Introduction:

Connecting shaft is connected with motor, when motor works, it drives connecting shaft and millstone to move. For material from the hopper into the grinding powder, mill spindle and grinding sets of relative operation, ground into small pieces of material particle crushing force; Ground of small particles under the spiral movement of mill was brought into two piece of grinding, grinding indented

relative operation, the material in a short period of time were shattered into tiny particles (powder); Powder from grinding tooth ditch, thrown around, at the same time comes on the mill powder plate down, out of the powder outlet.

Features:

1. The new controller is no longer need to tighten nut to fixed, the regulator to adjust to the specified location, machine operation does not affect the regulator in a fixed position, and no longer needs to be fixed.

2. The installation of the four strong magnetic device mouth, adsorption machine grinding abrasion produced in the process of iron powder, to ensure the food hygiene and safety.
3. Shorter connecting shaft, and tear open outfit is simple and convenient.
4. Stainless steel hopper is one-time stamping forming, no solder joints, more luxurious, more beautiful, more health!
5. Motor cover on both sides with six exhaust ventilation, it is conducive to motor cooling, protect motor; Second is to reduce the resonance because of the seal in the cabinet, less vibration.

Pictures:

                     Please feel free to contact me at any time, with any questions.