Self-shielded flux cored wire E71T-GS/ 1.0mm self-shielded E71T-GS flux cored Welding wire/le fil a souder 

E71T-GS is an all-position, single-pass, flux cored welding wire designed to weld carbon steel.  The unique quality of this product is that you do not have to use a shielding gas.  E71T-GS produces smooth arc action, low spatter, full slag coverage, and easy slag removal.  The bead appearance is not equal to a gas-shielded product, but the benefits of not having to use gas makes this product extremely popular.  E71T-GS operates on DC straight polarity (DCEN). * Make sure your power source is set properly for a good, non-porous weld.

Typical Applications
Lap and butt welds on galvanized sheet metal
Repair of automobile sheet metal
Joining of galvanized roofing sheet metal

AWS Specification           
AWS A5.20

AWS Classification           
E71T-GS

Welding Current
DCEN (Electrode Negative, Straight Polarity)

Typical Wire Chemistry
C         0.18
Mn       0.65
Si         0.40
Al         1.30
P          0.01
S          0.01

Typical Mechanical Properties (As Welded)
Tensile Strength, psi            86,400

Welding Positions
All positions

Shielding Gas
No gas required with this product

Available Diameters
.030”, .035”, .045”, .052”, 1/16”,  5/64”

Operating Range In Amps
.030”    40 –100
.035”    100 – 130
.045”    140 – 180
.052”    140 – 180
1/16”    175 – 300
5/64"     190– 310