Triple Durometer Screen Printing Squeegee Rubber

Characteristics:

Resistant to UV-drying lacquers

Long service life due to high material strength

Ageing-resistant

Rapid and sound recovery capability after exposure to solvents

Resistant to chemicals as free of fillers and softeners

Easy identification on hardness characteristics through color coding

Highly swelling-resistant to most solvents used for screen printing

Rapid cleaning through anti-adhesive properties

Application: most used for graphic printing, good resistance to solvent, be suitable for all kinds of inks.

Widely used in printing on textiles, glass, AD, packing, hectograph, chinaware, labels for wine and cigarettes, plates, PVC, CD, PS, scutcheon, electronic appliances, keyboards, filmswitch, circuit board, ABS etc.

Rigidity:

HARDNESS:

conventional hardness 60-85 degrees, triple durometer:Middle 90 A and two side 60-85 A of two sides.

Standard hardness: 55 SHORE A,60,65,70,75,80,85,90,95 SHORE A

Color: red, green, natural, blue, white or as your requirement

Standard Hardness:

Soft       55.60.65     shore A     red or natural

Medium   70.75       shore A     green or natural

Hard     80.85       shore A     blue or natural

Super hard 90.95       shore A     white

Triple medium 75/90/75   shore A     green/white/green

Triple soft   65/90/65 shore A     red/white/red

SIZE SELECTION:

25*5,30*5,30*8,35*8,35*9,40*7,40*8,50*8,50*9,50*10mm

LENGTH:

3.66m and 4m

EDGE SELECTION:

1. V-shape

2. U-shape

3. Other, according to customer's requirement.

Standard size:

Length: 4000mm   Width: 9mm— 500mm   Thickness:2— 20mm

Special sizes are available on request

60 Durometer(Orange) is the softest and leaves a minimal ink deposit, it’s great for very thin ink and water based inks.

70 Durometer(Yellow) is by far the most popular and versatile in the garment industry.it’s a great general purpose blade for just about everything.

80 Durometer(Blue) provides a stronger force for work with thick opaque inks.

70/90/70 Durometer(Yellow/Clear/Yellow) gives you a soft edge with a hard center for optimal control.

THREE LAYER SQUEEGEE:

Three layer scraper has triple hardness, including a hard part between (90 degrees) make the sword scraping ink increase strong sex, helps to keep the good scraping ink Angle, to reduce the amount of ink attached, soft part (60 degrees-70 degrees) can reduce the sword scraping ink printing interface to the damage.

Triple Durometer Screen Printing Squeegee Rubber