Welcome to my shop

squeegee rubber blade

screen printing squeegee

rubber squeegees blade for screen printing

Characteristics:

Resistant to UV-drying lacquers

Long service life due to high material strength

Ageing-resistant

Rapid and sound recovery capability after exposure to solvents

Resistant to chemicals as free of fillers and softeners

Easy identification on hardness characteristics through color coding

Highly swelling-resistant to most solvents used for screen printing

Rapid cleaning through anti-adhesive properties

Squeegee Series:

W-Series:

For water-base ink in textile printing

S-Series:

For common solvent inks in general graphic printing

V-Series:

For Various high-grade inks in elegant printing

UV Series:

It is widely used with UV inks, including CD and multi-color printing

AA Series:

For high requirement printing with good solvent resistance,abrasion resistance

Rigidity:

Shape:

G1 Square edge 90 deg blade is used for a wide range of graphic and textile printing applications where a high ink deposit is required. Suitable for manual and automatic printing.

G2 G3 Single beveled squeegees are used for printing into non-absorbent surfaces such as plastic,glass or metal. Conforms easily to irregular surfaces while maintaining excellent ink deposit. Widely used on container printing and alsogood on botte printing.

G4 G5 This double bevel edge blade (60 & 45 deg) provides excellent control for direct printing onto cylindrical surfaces and irregular forms, also fine print for textiles.

G6 G7 This double bevel flat edge blade is used on most substrates including direct ceramic printing. The profile allows for maximum ink shear and good angle control when depositing ink with a wide range of viscosity on multiple substrates.

G8 G9 The single bevel flat edge blade, allows for increase squeegee angle while maintaining the sharp edge for maximum ink hear on cylindrical substrates. Works well wth high viscosity ink.

G10 It is specially designed for the requiremet of container printing and its advantage is to offer two printing blades while reducing the breakdown time during the production.

G11 Blade will flex less preventing roll over, the angle therefore maintained giving excellent ink shear. The softer edge allows for good ink deposit.

G12 Square edge composite triple hardness blade gives the printer the responsiveness of a soft to medium hard blade without the undesired flexing created by increased secondary force squeegee pressure. Excellent for printing on high mesh counts(120/140 threads/cm) with high tension

Standard Hardness:

Soft 55.60.65 Shore A red or natural

Medium 70.75 Shore A Green or natural

Hard 80.85 Shore A Blue or natural

Super hard 90.95 Shore A White

Triple medium 75/90/75 Shore A green/white/green

Triple Soft 65/90/65 Shore A red/white/red

Size selection:

25*5. 30*5. 30*8. 35*8. 35*9. 40*7. 40*8. 50*8. 50*9. 50*10mm

Length:4000mm Width:9mm-500mm Thickness:2-30mm

Special sizes are available on request.

Application:

Widely used in printing on textiles,glass,AD,packing,hectograph,chinaware,labels for wine and cigarettes,plates,PVC, CD,PS, scutcheon,electronic appliances,keyboards,filmswitch,circuit board,ABS etc.